Jump to content
SAU Community

Recommended Posts

So the 30K was her quote to fix.

they disputed it and had them do cheaper repairs on some areas than she wanted to get the cost down.

know she wasn't happy with the first time getting it back, and then issues after they attempted to fix that, not sure where it at now however.

Bit of both

It's a visitor space he's parking in (even though he's a permanent visitor; his girlfriend lives in the complex) and the guy in the visitor space next to him is parked a fair way over too. His car is simply too big for the limited space left for him. If I wasn't hugged up against the other side of my space to keep my distance from the visitor cars (clearly this is working) then his oversized hipster douchebag utility wouldn't even get in there.

My black car doesn't move so I don't care about him blocking me in, but I've seen the way this kid drives, like a fkin retard, and I don't like it, or seeing him park this close to my car. I don't believe someone is guiding him in and it's only a matter of time before he hits a car down there.

Bit of both

It's a visitor space he's parking in (even though he's a permanent visitor; his girlfriend lives in the complex) and the guy in the visitor space next to him is parked a fair way over too. His car is simply too big for the limited space left for him. If I wasn't hugged up against the other side of my space to keep my distance from the visitor cars (clearly this is working) then his oversized hipster douchebag utility wouldn't even get in there.

My black car doesn't move so I don't care about him blocking me in, but I've seen the way this kid drives, like a fkin retard, and I don't like it, or seeing him park this close to my car. I don't believe someone is guiding him in and it's only a matter of time before he hits a car down there.

WWDD - What would Dezz do - do that
  • Like 2

Barry believes it, with E85. RB26s with 98 make about 340-350 with GT-SS.

It's pretty unlikely but you sha'll find out in time, we built a RPM 2.8 with -9s and it made 360kw on E85. I think it could have been pushed harder than that for sure with the right fuel setup and exhaust.. but 400.. pretty unlikely with those turbos without straining them.

Interesting

Steve 34R aka R8TED only made 317kw on the racepace dyno on e85 and -9's. Not sure what the norm is, maybe Matt Borci will throw in his 2 cents

Must be thinking of someone else, Steve's never been to Racepace. I remember he did make like 235kw when he switched to E85 and a tune he was telling me at Sandown last time I was there... was hard to hold back the chuckles at less than stock 98 power with Ethanol...

It's pretty unlikely but you sha'll find out in time, we built a RPM 2.8 with -9s and it made 360kw on E85. I think it could have been pushed harder than that for sure with the right fuel setup and exhaust.. but 400.. pretty unlikely with those turbos without straining them.

Must be thinking of someone else, Steve's never been to Racepace. I remember he did make like 235kw when he switched to E85 and a tune he was telling me at Sandown last time I was there... was hard to hold back the chuckles at less than stock 98 power with Ethanol...

That might be Hamish's racepace dyno theory coming into play

Previous owner of GTR dynoed it with the GT-SS and said he got about 350awkw - could easily have been full of shit but even close to that I can see another 50kw from another 400cc and E85.

In any case I'm not too worried - I have no doubts I'll end up with -5s down the track but definitely wanna see what the small turbos can do in the low and midrange with the big engine. I think it'll be linear like standard XR6 turbos, only with a bucketload more pull.

Also when you say "we built" you really don't need to call it an "RPM 2.8" lol

They can throw a pair of turbos on any old 2.8 that rolls in the door, the RPM 2.8 is a specific base build so we at least know what mods have been done to make it a 2.8, if its been ported, etc

It's pretty unlikely but you sha'll find out in time, we built a RPM 2.8 with -9s and it made 360kw on E85. I think it could have been pushed harder than that for sure with the right fuel setup and exhaust.. but 400.. pretty unlikely with those turbos without straining them.

Must be thinking of someone else, Steve's never been to Racepace. I remember he did make like 235kw when he switched to E85 and a tune he was telling me at Sandown last time I was there... was hard to hold back the chuckles at less than stock 98 power with Ethanol...

My bad he just mentioned racepace in his comments.

https://www.facebook.com/scampbell82/videos/10205997578712187/?pnref=story

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey everyone!!  I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings. It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L) My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick?  I've checked images of some of the genuine dipsticks, but none of them have the length in it. https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him. Thanks in advance 🙏🏾 
    • Sport. I didn’t rebleed it cause I just removed the slave and left connected.    I will change line and slave and see how it goes.  
    • Oh and how is the rattle when foot is on the clutch ?
    • Did you get the sport or track ? From what the documentation says the uniclutch has a small amount of movement to disengage.  So your story of tricky pedal setup seems common.    Hopefully you got it bled up too, as the bite point moving around is usually either plates wearing in or air in the line.     
    • There's always "MIG it up and grind it back".
×
×
  • Create New...