Jump to content
SAU Community

Recommended Posts

17 minutes ago, Leroy Peterson said:

Need to paint the D1Rs black so no one can see them properly.
Theres that falcon on bags that was wrapped like an aqua green colour... White D1Rs spoiled it.
I also thought 18's were too small for gloria, but reducing tyre width made heaps of difference. Also good luck try to sell wheels without tyres. People too tight assed about it. Its like rego and selling cars.

True, they only Achilles but still pretty new / decent enough for now.

Dunno, some kid is keen af for the BBS's trying to get money together, maybe this will make it affordable :P 

Also birds those were Stance SC5's or what ever :P 

 

Here you go same car with your favourites

14466305_10154067074692499_424908004_o.j

 

Anywho, enough ford talk, lets talk about Mohsen. 

Edited by UNR33L
2 hours ago, Leroy Peterson said:

Anyone going to the drags Friday night? It's going to be mayhem mayhem mayhem

I don't understand driving in a straight line line line

6 hours ago, UNR33L said:

first ones i don't mind, but from the pics pretty much won't fit over the brakes.

I just tried on some of these at otr with the 9.5s on the front +30 clears brakes by a bees dick, only problem is cant get silver they can only get flat black. Still looks good though just need to decide if I want to go black again

 


These look shit house Leigh, apprentice across the road from me has them on his FG X XR6T and they look proper shit house. Don't do it!

12 hours ago, Rekin said:

HR rarely stuff up any annual leave / salary calculation. It's probably covered in some fine print in the contract.

 

12 hours ago, blah_blah said:

I'd say the opposite, unless you work for a big corporation.

I deal with many errors on a regular basis.

Most HR or book keepers have no idea of the tax law and Fair work entitlements in regards to staff entitlements

 

12 hours ago, Rekin said:

Transaction errors perhaps but I've found contractual calculations are usually accurate to the decimal point as they had to go thru approvals/legal/payroll etc

 

It's a minor error, but it's still there...

Standard working hours at that place used to be 9-5 with a 30 min unpaid lunchbreak, so a 7.5h/day = 37.5h week. Thus 20 days of Annual Leave would accrue at  (20d x 7.5h) / 52w = 2.88h/week

When workplace agreements were the thing to do (8 years ago) they drafted one up and change it to be a 38h week and made everyone work an extra 30 minutes on Wednesday evenings.

So since that time, the hours were 38/h week, which should have accrued at (20d x 7.6h) / 52w = 2.92h/week... but just looked at the payslips and although our hours were changed to 38, it was still accruing at the 37.5 rate. (They forgot to update it in MYOB 8 years ago)

Only noticed because in July this year they changed to Xero and I just spotted that the number is different to what it normally was.

So technically, they've shortchanged everyone... only a little bit of time per week... but for someone like me who has worked there for the entire 8 year period it adds up to about $700. (There are a few other staff that it would apply to as well, some at a higher hourly rate than I was on)

Same thing with accruing Sick Leave, but thats a moot point now.

Also, I had 5.5 hours of Time in Lieu which was "earnt" by getting up at 1am a few months back and fixing a major IT crisis as it unfolded... That didn't get paid out in my final pay, not sure of the legislation around that, can't find anything in the work place agreement so it should fall back to National Standards.

13423897_643436012477890_107009884822907

2 hours ago, Borci88 said:

Leroy how much you pay to enter?

$25 to spectate.

it sounded like it would be fun to watch. uleh's and old men getting competitive and racing each other for money. good to see some fast cars, but also cars break and maybe a punch-on. looks like its 1/8th mile (not sure if good thing?) and no timeslips, good ol' lights win.

and I think up to 200 people are allowed to spectate from the start line which is kind of cool.

 

It's a minor error, but it's still there...

Standard working hours at that place used to be 9-5 with a 30 min unpaid lunchbreak, so a 7.5h/day = 37.5h week. Thus 20 days of Annual Leave would accrue at  (20d x 7.5h) / 52w = 2.88h/week

When workplace agreements were the thing to do (8 years ago) they drafted one up and change it to be a 38h week and made everyone work an extra 30 minutes on Wednesday evenings.

So since that time, the hours were 38/h week, which should have accrued at (20d x 7.6h) / 52w = 2.92h/week... but just looked at the payslips and although our hours were changed to 38, it was still accruing at the 37.5 rate. (They forgot to update it in MYOB 8 years ago)

Only noticed because in July this year they changed to Xero and I just spotted that the number is different to what it normally was.

So technically, they've shortchanged everyone... only a little bit of time per week... but for someone like me who has worked there for the entire 8 year period it adds up to about $700. (There are a few other staff that it would apply to as well, some at a higher hourly rate than I was on)

Same thing with accruing Sick Leave, but thats a moot point now.

Also, I had 5.5 hours of Time in Lieu which was "earnt" by getting up at 1am a few months back and fixing a major IT crisis as it unfolded... That didn't get paid out in my final pay, not sure of the legislation around that, can't find anything in the work place agreement so it should fall back to National Standards.



You should start an office rumour about it
  • Like 1

Going to casually mention it to them if I do happen get called in over the next few weeks to help fixing their phone system which is currently broken... If I bring it up myself, I doubt I'll get called in if they think I'm just money grabbing

subtle salary suggestion there Simon

 

I assume they treated you well and leaving on good terms to not mention the variance

 

Otherwise why would you forgo the money with just a hey your calcs are wrong m8 

subtle salary suggestion there Simon



Shit you'd be doing well to calculate his salary from that info, particularly given the payrises/promotions over an 8 year period
6 minutes ago, joeyjoejoejuniorshabadoo said:

 


Shit you'd be doing well to calculate his salary from that info, particularly given the payrises/promotions over an 8 year period

 

Easy

Annual leave is paid at the current hourly rate, you dont need to know his payrate during the 8 year period only the end

  • Like 1
13 hours ago, Borci88 said:


These look shit house Leigh, apprentice across the road from me has them on his FG X XR6T and they look proper shit house. Don't do it!

Got a pic? probably cos he has the 18s and 18s look shit on falcons.. so many people do it dunno why. 

Oh and FGX looks sheit too, wait is that a white one? 
Limited to wheels now with big front brakes :(

Edited by UNR33L
11 hours ago, Odium said:

Also, I had 5.5 hours of Time in Lieu which was "earnt" by getting up at 1am a few months back and fixing a major IT crisis as it unfolded... That didn't get paid out in my final pay, not sure of the legislation around that, can't find anything in the work place agreement so it should fall back to National Standards.

Yes I had 100 hours TIL and got paid out at last place, you should be able to fight it but for 5.5 hours probably not worth it 

Easy

Annual leave is paid at the current hourly rate, you dont need to know his payrate during the 8 year period only the end



Oh yeah... Forgot about that lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...