260rs Stalling When Disengage Clutch During Parking

[bluewaffle]

ive searched for a few days now without an answer to my problem.

i have a series 2 260rs running a nistune. the car drives fine when i completely engage and then disengage the clutch. when i park the car and i dont put full load on the clutch and disengage it again the car stalls. sometimes it takes about half a minute of cranking to start the car again after this happens.

anyone had this problem?

[KiwiRS4T]

ive searched for a few days now without an answer to my problem.

i have a series 2 260rs running a nistune. the car drives fine when i completely engage and then disengage the clutch. when i park the car and i dont put full load on the clutch and disengage it again the car stalls. sometimes it takes about half a minute of cranking to start the car again after this happens.

anyone had this problem?

Sure its not the power steering pump putting load on the engine? What's the normal idle speed?

[bluewaffle]

Sure its not the power steering pump putting load on the engine? What's the normal idle speed?

idles about 1100-1200.

on full lock the car does stall too.

[bluewaffle]

anyone?

[Ben C34]

Ask tuner

[Hadouken]

Ask tuner

Best advice

[KiwiRS4T]

http://www.sau.com.au/forums/topic/110431-diy-aac-valve-cleaning-idle-reset/

Don't know if this applies to the RB26 but if it does it could fix your problems.