Rb20 q'ns

[Ceffo]

Hey guys,

Was at CRD on the weeknd to get my car dynoed prior to fitting an bleed valve. and found out im making 150rwkw@10psi on what im assuming is an stock T28 turbo?.. What i dont get is most peeps I know who own rb20det's are getting like 150rwkw@14psi

- current setup is as follows

- 2.5 inch turbo back exhaust

- fuel pump

- Aftermarket AFm

Im assuming there are valid reasons for this?

- such as CRD fudged the numbers (i think highly unliky as it was in shootuout mode)

- bigger turbo t3 maybe

- good engine (I was told by the crd boyz that there were 3 versions of the rb20 blocks)

if i have a bigger turbo whats a good way to tell if u got a bigger turbo from taking the covers off without pulling the turbo out as we all know the t28 and t3 all look alike on the outside..

Im asking b4 i wind up the boost and start running up the boost and running down wsid to find out I have blown something..

cef.

[rb20-calais]

i made 132rwkw@10psi with 3" exaust front pipe back, fmic, pod before i did more mods

damn you

[yogi000]

i made 110rwkw, at CRD aswell, purely stock everything. r32 gtst, not one performance part.

[CerealKiller]

I made 131 at UAS relatively stock (10psi + cannon muffler)

[31GUN]

I got 132rwkw at C&V, 13psi, cat back 2 1/2 zorst and.....thats it.

Red rocker cover ECCS.

Hooks