Jump to content
SAU Community

Recommended Posts

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Interested in a Drivers side Seat Rail for gtr r32??.... I have a sparco Ultra seat will it sit at the same height i got one made up but no one else can sit in it besides me,,,Anyone taller there head hits the roof...

That wont be happening right???

Cheers

Price would be good though

ok rails just arrived and they look the goods. Just to clarify this is the whole frame and rails which will bolt to the floor plan and seems to be only for r31,r32,r33 not r34, as thats whats on the bride label.

I will try sneek out of work early today so i can take rails to fabrication shop and get them to price the drivers side up for me.

Getting my rails trial fitted to my car tomorrow so we know they will fit exactly.

Price looks to be around the $250 for the drivers side (Still to confirm). This is the whole assembly not just the rails.

bride%20seat%20rail.jpg

So confirm who would be interested for $250 for drivers side. If not many i wont bother getting em done, and will just put em in my car and be done with it.

R34 is different to the rest of the R series bolt ups for the seat rails.

I require a Bride Rail for the Drivers Side for R32/A31

Are you saying its $250 for a COPY of the bride rail? A Bride rail is $160 from a local online shop. How much did you pay for yours, and was it new or s/h?

JK

R34 is different to the rest of the R series bolt ups for the seat rails.

I require a Bride Rail for the Drivers Side for R32/A31

Are you saying its $250 for a COPY of the bride rail? A Bride rail is $160 from a local online shop. How much did you pay for yours, and was it new or s/h?

JK

If you can find 15 bride rails for a r31/r32/r33 please go ahead and take over my group buy!! But the simple fact is that there aint that many around.

So if anyone is interested left me know ASAP otherwise i will just forget about it and just get my seats finially installed today.

Update

Trial fitted the rails to the car and seat and the rials fit in perectly and sit the seat straight and at the exact right height. You may need to modify the bolt location slightly depending on ur seat tho.

So place ur interest if you want the drivers side or both.

I am getting 2 sets made up driver and passenger side for 2 friends next week, so if anyone wants some let me know so i can get em made in the same batch, or even after that as the jigs have already been setup for em

i got all excited about these, then realised they will only work with reclinable seat not fixed bucket :D

oh well i'll have to keep looking!

I dont see why they wouldnt work with a fixed back seat as the fixed back has nothing to do with the rails or how the seat bolts to the rails.

Most fixed back seats use side mounts, perhaps that is what he means.

With bolting side mounts onto a bottom mount rail you get the problem of jacking the seat up.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...