Rb25det Rebuild

[jake.meister94]

I've started to strip down my rb25 motor I'm a 3 year apprentice and know my way around jap cars pretty well. Just wonder what else I should maybe watch out for or take into consideration. I'll be doing the gearbox as well. It will be a decent process so no rushing. Thanks

[Ben C34]

Watch out for too much nos blowing the welds off your intake and popping out the floorpan

[Hadouken]

just remember to get your parts overnight from japan

[Jordy32]

I'm not a mechanic or apprentice or anything, just love playing with cars and i found the rb25 piss easy to work on, you should be fine

just make sure you put the coolant hoses under the inlet plenum on correctly because they're a bitch to fix when the engine is back in the car!

[JustinP]

Make sure there is no danger to manifold.

[hypergear]

Must make sure the machine shop bore your block to the right piston clearances, inspect the crank and get right size bearings, need valve springs and sets for the head. and its good to make some power.

[Pridenjoy]

And have a good look at the pistons to make sure the ring lands ain't cracked, they can be rather tricky to see.

[AngryRB]

stuff all that, just drop a good RB30 untouched bottom end in and be happy with alot of torque

[Nismo34R]

Do you have a tab at Harry's?

[XRATED]

2 of the big ones.....

And he needs them tonight.

[Rbdirty30]

For race wars

[Hadouken]

The fool is racing a Honda 2000

Jesse don't do it. I bet he has more than a 100 grand under that bonnet.

[Rbdirty30]

Noooooo moooonnnnicaaa