Where To Get R33 Brembo Brakes Pins And Springs And Clips?

[tN^]

hey guys i bought a set of r33 brembo calipers and it didn't come with any pins/clips or spring plates

where can i get a set for front and rear calipers

simialr to this: http://www.ebay.com....mMakeTrack=true

also i where can i get it rebuilt with new seals and tested before i go ahead putting them on my car (one day)

thanks

TN

(also is should there a metal backing plate? or you usually get that with pads? i can't remember)

[sweefu]

The backing plates are anti squeal shims. Good to have but not essential for use.

Try Taark, Kudos Motorsport or Streeter for the parts you need, should be readily available.

[tN^]

^thanks

anyone know if the r33 gtst brake caliper bolts same as the r33 brembo's?

[djr81]

Probably not. Nissan like 1.25mm pitch and when I put Brembos on they were 1.5mm

[tN^]

Anyone have access to nissanfast? Could someone get the part number for the r33 brembo brake pad retainer and pins?

I want to see if they're same as on v35 skylines

Found a rebuilding kit for 1/4 of the price from the states but they for v35 skyline/350z. Read they're same for r33 brembo. Can anyone confirm?

[tN^]

Hopefully this would help someone down the track.

FRONT PIN CLIPS CROSS SPRING- 41218-12U26 (same as R34 GTR, G35, Z33)

FRONT REBUILD KIT- 41120-12U25 -(same as R34 GTR, G35, Z33)

REAR PIN CLIPS CROSS SPRING -44218-12U26 - (same as R34 GTR, G35, Z33)

REAR REBUILD KIT- 44120-12U25 -(same as R34 GTR, G35, Z33)

FRONT R33 GTR CALIPER BOLT SPEC (DIFFERENT TO R34):

M12X1.75 30MM 8.8 TENSIL

REAR CALIPER BOLT SPEC:

M10 1.5MM 30MM 8.8 TENSIL

Brought the stuff from Z1 motorsport in the states.

[GTSBoy]

FRONT R33 GTR CALIPER BOLT SPEC :

M12X1.75

Really? 1.75mm pitch......

[tN^]

Really? 1.75mm pitch......

Yea still abit confusion to that one. Most say 1.75mm pitch one or two said it was 1.5mm

[niZmO_Man]

1.5mm pitch brah