Jump to content
SAU Community

Recommended Posts

The difference from my 2.6L build at a RB30 was minimum $4000 (from RIPS).

And that would blow out FOR SURE as builds always do.

So its not as simple/cheap as you say when done properly by one of the worlds best.

I never looked at the 2.8L kits as i didnt see a big advantage unless I went 30Dett.

Edited by Stixbnr32

price difference from my 2.6 to 2.8 is sweet FA!

1000 - 1500max

money well spent imo.

why spend money cleaning up the old crank which was in good nic + balancing etc, I now have a new 2.8 one.

I prefer the throaty note also.

Edited by mr skidz
  • Like 1

engine parts are only ever as good as the workshop that screws it together.

I've seen first hand massive dollar equipment hand grenade on first run/dyno pull and on the other hand I have witnessed bone stock unopened motor's that had "claimed" to be built go on to produce over 400wkws for years.

"I BELIEVE THE MAGIC IS IN THE ASSEMBLY "

Well lets throw something else into the mix, what brand stroker do people go for? Are they as all good as each other, or or some above the rest?

I used the Nitto 3.2 Stroker , seems pretty good so far and from what I read about them, they are a pretty good unit , all good so far, fingers X

  • Like 1

if I was chasing massive power numbers I'd go nitto with full counter crank. best bank for buck if you're chasing maximum RPM and horsepower. (drag)

I had no intention of revving my engine to the moon.

My intention from the get go was to build a grunty responsive street car that could be used anywhere so for the price of a TOMEI KIT which comes with virtually everything for the rotating assembly it was a no brainer at that price.

Edited by mr skidz

1 - Tomei stroker = $5,200 on nengun ATM. That includes crank, rods, rod bolts, rings and pistons.

2 - Machining and assembly, lets call that $3,000

3 - Head gasket = $300

4 - Water pump and oil pump = $1700 for both

5 - Head and cams. That could range from a service to a full blown $10,000 effort. For the sake of it lets go with $2,500.

6 - New timing belt = $150

7 - Bearings = $300

The rest of the stuff like sump baffles, turbo's doesnt really matter.

Items 2-7 you need regardless of what size engine you go with.

Now, Just say you have turned a bearing in your 26, crank is toast.

New crank (looked up a price on Ebay) = $1724

Pistons. Choose your poison. Lets go with CP = $1155

Rods. Say a manley H beam = $1280

Total $4159 for the rotating assembly. As opposed to $5,200 for a tomei stroker.

$13150 for a stroker

$12,109 for a 2.6 assuming new crank needed with the same above mentioned parts.

I havent inlcuded shipping in any of this. Either way you'd be paying it regardless.

These are VERY rough figures. I'm not going to sit here all night looking for the cheapest part or your brothers cousin can do a special price.

By the time you factor in injectors, clutch, fuel pumps, ECU, tune cost, exhaust, dumps, turbo's, intercooler, wheels, brakes, tyres and alllll te rest of the gear you need to "complete" a car, the difference is insignificant.

These figures are slightly inflated.......

I have my receipts sitting next to me for the complete rebuild.

When i did my rebuild a couple of years ago a stroker kit was about 3-4k ontop of the standard rebuild.

Have a look at what I wrote.

I wasn't going to sit there all night finding the cheapest price around. It all comes down to what product you use. Some may want Argo rods, another guy might use HKS. I'm not going to sit there and price up 20 different combo's.

What I was trying to say was at the end of the day it's not $7000 worth of difference, even if it was, I still wouldn't use a stock throw crank.

For what it's worth, a 2.8 is still too small.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 馃檹 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 馃槈. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 馃槏 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
  • Create New...