Jump to content
SAU Community

Recommended Posts

Hi all,

During a track day I have noticed coolant under the reservoir (it pools and runs down near the battery tray and onto the ground).

Is there some kind of relief under there when the coolant gets hot?

The cold coolant level is between the min/max, obviously when the coolant gets hot the level rises. In this case it's sits just above the max level.

I have previously not kept track of the coolant levels, is the leak and the location of the leak something of major concern?

**Noting that the car isn't overheating at the moment

Thanks

Link to comment
https://www.sau.com.au/forums/topic/459469-coolant-leak-r32-gtst/
Share on other sites

Check your radiator cap and rating. Replace with a newy if required.

Likely the water is getting hot and traveling down the overflow hose (or as steam)

Remove your reservoir and give it a good look over for crack/leak

Edited by Sinista32
  • Like 1

Is the overflow bottle actually overflowing? or is high g-force cornering sending it out the top of the overflow?

Your exhaust will create steam during warmup, condensation in the exhaust etc.... Does the exhaust steam smell like coolant?

Is the overflow bottle actually overflowing? or is high g-force cornering sending it out the top of the overflow?

Your exhaust will create steam during warmup, condensation in the exhaust etc.... Does the exhaust steam smell like coolant?

It overflowed on the straight because the ecu cut cylinders/dropped the max allowable revs. Assuming it overflowed when that happened.

Doesn't really smell like coolant but it's hard to tell with the smell of the E85

Water expands when you heat it, it has to go somewhere...

Sounds like you got it hot, very hot. Not the first car to have overheating issues getting thrashed at the track.

What is the best course of action to prevent it overheating? Radiator has been upgraded to a koyorad 6 months ago.

My goal is to be able to do 20 mins of solid driving on the track without overheating.

Note the car is a dedicated track car RB20det with 380rwhp. Has all the modifications to suit.

 

What is the best course of action to prevent it overheating? Radiator has been upgraded to a koyorad 6 months ago.

 

Ducting. Close in the air flow path around the radiator so that the air has to go through the core and not around. Use corflute, grey packing foam, whatever is available and can be shaped and shoved into place.

Refit the undertray if it is not on the car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As an ex-skyline owner Going off how these things are now "modern classics", I would keep the twins and just "refresh" bits that are required for reliable power and have a car you can take out for a cruise whenever you get the itch As a idiot who cannot leave things alone Going deep into the "rabbit hole" is a easy thing to do, as previously mentioned, once you start it becomes a slippery slope, wirh lots of supporting mods, and possibly rebuilds, and unless you have a bottomless pit of funds, the car can spend most of its life sitting in the garage,  broken, waiting for parts, or building more funds For a classic like a R32 GTR Basically, a reliable OEM+ refresh, that isn't a broken garage queen, is alot better than a car that you build, then break, then fix, then break again And it isn't just the engine you need to worry about, these beasties are getting on in age, and all parts are getting, and have got, expensive, the days of picking up cheap replacement engines and other driveline parts are well and truly over The funds not spent on going a single with quality parts, and with all the other other bits required to make it happen, could be spent on refreshing alot of other parts A wise man once said "If you cannot afford 2 GTR's, you cannot afford 1", I also believe he said this about 20 years ago when you could pick up a clean R32 GTR up for around $20k My advice for a R32 GTR (the one and only true Godzilla in my mind) is to think holistically about the whole car, the body, the power train, the suspension, the brakes, and the driveline SAU is a wealth of knowledge with decades of Skyline experience,  from stock, to OEM+, to modified to varying degrees, to full on or weekend or dedicated racecars, as well as full on money pits that rarely leave their garage Treat the old girl nice and give her what she deserves, you are a lucky man to own such a classic car  
    • For that price you could buy the hypergear turbo (big fan as I run one) and the Haltech ECU..
    • +1 for the Elite 2500. Get some new knock sensors while you are at it (pretty cheap), look up the TAARKS Nissan knock sensor kit. You may also want to get new coils (R35gtr) while your at it (assuming your on stock ones), as they are a liability. Mine started right up and idled fine on the base map. Also go MAP over MAF, as said above, Haltech make this super simple right out the box. Another fanboy of DBW here, Outsider Garage from your neck of the woods make some nice conversion gear for the R33 (that’s where I got some of my gear from).
    • Nvm ignore this I read it wrong
×
×
  • Create New...