Jump to content
SAU Community

Recommended Posts

Hi all first time poster,

i have a 2002 m35 stagea car broke down the other night and when called the raa they said fuel issues most prob fuel pump took to mechanic who ran some tests and thought same prob so swapped the fuel pump but car still doing the exact same thing will idle fine but for some reason when you give it throttle is does nothing besides try and die the mechanic said for some reason the pump is only getting 1/4 of the voltage it should be and the injectors are dumping three times as much fuel as they should be, he has no idea why has been troubleshooting for a week now, any one else with this issue and how they fixed it ?

Link to comment
https://www.sau.com.au/forums/topic/459758-m35-with-issues/
Share on other sites

How did he establish fuel pump? Did he put a pressure gauge on it?

Also, 3 times the fuel is a weird statement, and unmeasurable. Time to take it somewhere who knows what they are doing.

+1, take it to someone who knows the car..

Both my mechanics have never seen a VQ25DET before.. and it's 14 years old

Don't rush into process of elimination.

Link to comment
https://www.sau.com.au/forums/topic/459758-m35-with-issues/#findComment-7604940
Share on other sites

Fuel pump runs lower voltage at idle to reduce noise and heat.

Symptoms sound like the Air Flow Meter could be stuffed. Unplug it and restart your car a couple of time so the ecu knows its unplugged and will enter limp home mode(won't allow revs much over 2,000rpm which is normal). If it then idles smoother the AFM sensor may need replacing. I replaced mine with a genuine Nissan item after my Chinese sensor lasted 4 days but others say the Chinese copies are more reliable. Maybe talk to scotty about which one he has had good reliability with. I'm sure he will chime in soon.

*a loose intercooler pipe or charge system leak will also give the similar symptoms as a blown AFM. So check them before buying a new sensor if limp home mode works.

Matt

Edited by BoostdR
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/459758-m35-with-issues/#findComment-7604976
Share on other sites

It's ferked, and the ecu has no way of telling it's ferked.

Scanners don't tell you the fault, they only tell you what the ECU thinks the fault might be, perhaps.

Edit, does it run the same if you unplug the AFM?

Link to comment
https://www.sau.com.au/forums/topic/459758-m35-with-issues/#findComment-7605202
Share on other sites

Does it drive the same in AFM limp mode?

If it idles fine, then it obviously isn't the fuel pump, slap a known good AFM element in there and try it out, it's the only way to rule the AFM from the equation. The AFM's rarely fail where the ECU actually throws a code in my experience, and I have changed literally hundreds of them.

Once it's sorted, get a new mechanic. I suspect he just wasted your time and money changing a perfectly good pump. Do you know what pump he put in there? it might need to be re-wired if it's an aftermarket Walbro or similar. They don't like that low voltage at idle/cruise (that all cars do these days.)

Link to comment
https://www.sau.com.au/forums/topic/459758-m35-with-issues/#findComment-7605210
Share on other sites

The pump he put in was a walbro pump yes, the mechanic has only ever dealt with upgrading parts on m35 stageas before so it all one big learning process unfortunately he never had one with this problem before like most mechanics I've spoken to before him

Link to comment
https://www.sau.com.au/forums/topic/459758-m35-with-issues/#findComment-7605223
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The above video is working normally. That is, that's how the right hand indicator should cancel when rotating the wheel left.
    • I noticed that I could see creatures on the moon when I turned my new headlights on. I thought I should check the alignment. It's pretty rudimentary but I just grabbed some dry wall and put it against my tablet and made sure the beam was below the height on the headlights. Ie the beam is at 600mm on my car, I just made it lower than that 7.5m away.  Not the best but it'll do until I can do it properly at the local shops.   
    • As @Duncan said - the bores are most likely to cop it. But anything can and does happen. Rods are cheap. Rods are good. The work to rebuild the motor will be 30x the price of rods. You won't notice it.
    • Yeah car has 110 on the clock. That said the front turbo (that exploded) doesn't seem to be the original, it has a S1 part number but the car is a series 3. Yep, in the cat is where I first found the turbine wheel pieces - a couple decent sized ones, then a whole lot of fragments.  I agree, probably makes sense to upgrade parts that are being replaced. Things like rods would be 'nice' but realistically it seems unlikely they would need replacing. I was hoping that it was a case that they generally f**k up the valves but not the bore, or vice versa. Is it generally the scour damage rather than ceramic bits getting mashed into the piston tops / valves? I tried a search but couldn't find any threads with pics from the guts of a motor that's had this happen. 
    • Front seats now in, fixing a little rust then front doors sealed up again finished. had to install a fire extinguisher within arms distance of drivers seat for hill climb regulations. little bit of good old silo diff action lol IMG_9146.mov
×
×
  • Create New...