Jump to content
SAU Community

500hp R34 Gt-t ?!

OMRAN
 Share

Recommended Posts

OMRAN Collaborator

OMRAN

Posted
Posted

hey guys ... every one here have a good experiance in mod. skylines ... so i posted that thread coz am planning for 500 BHP daily use R34 GT-T..

what is the best thing to replace, or mod. ?? forget about how much it will cost what i really want is somthing profitional ... :headspin:

for ex. what is the best turbo to fit .. greddy ,hks etc ... what is the best fuel manegment .. a'pexi greddy hks ... .... and 100% u know what i mean .. :)

can i do that with a bolt-on turbo ... (i dont wanna change oil water lines .. or the downpip ) .. coz my car is a left hand drive ....

can i do that ...??????

keep in mind ... (DAILY USE with NO PROBLEMS) ... !!

thanx in advanc guys .. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/
Share on other sites
Serious-Seven Rising Star

Serious-Seven

Posted
Posted

wow a lhd r34!.

well, first of all you should check out the HPI dvd issues.

They are fantastic and describe a step by step guide on how to do 11 seconds in a Pretty stock R34 GT-T and they manage to run 11.96 using standard engine and gearbox.

there should be some people in here that can have time on there hands to post up all the details.

thx

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/#findComment-934560
Share on other sites
PurpleR32 Experienced

PurpleR32

Posted
Posted

personally, i would put a RB26DETT in it, and then bolt on the accessories. If it is true relaibility, a RB26 will last longer with bigger HP than an rb25.

That being said, if you want to keep the 25, then To4z, T78-29D etc should keep you within the required power level.

Power FC, injectors, cam gears, cams, clutch, exhaust, fuel pump, intercooler....etc

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/#findComment-934576
Share on other sites
Serious-Seven Rising Star

Serious-Seven

Posted
Posted

Just get yourself a Garret GT30 turbo they are going for cheap compared to the other turbo's out on the market with similar specs.

550cc injecters

bigger fpump

good tuning ecu for UAE

fmic

cam gears

exhaust system

dump pipe .

is there something missing on the list ?

EDIT : and a clutch offcourse!

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/#findComment-934746
Share on other sites
PurpleR32 Experienced

PurpleR32

Posted
Posted

a To4z MAY be a little large, however you want a turbo that makes the power easily. Although admittadly you dont want too much lag. You also dont want to find that; well yes i initally wanted 500 BHP, but now that i have it, a little more wouldnt go astray. To4z or To4s are also options.

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/#findComment-934775
Share on other sites
OMRAN Collaborator

OMRAN

Posted
  • Author
Posted

guys ... .. lets see which one is better ... ?? i mean which turbo is the best .. for 500 bhp

HKS 3040

HKS 3240

garrett GT 30

To4Z << if its too big .. i really dont need it ...

ok which one is better .. what do i need to change if i wanna fit one of this .. and most important .... can they reach 500 hp .. ??

i'd like it to be bolt on turbo but i dont think bolt on turbo can reach 500 hp

about the injectors ... 550 cc .. r they the best .. ???

i must have SAFC to ..... what other electronics should i have??

what cam gear would be ok ... ?

fmic ... thats easy to find ...

fuel pump ..also easy ..

down pipe .. that would be hard to find ....

exust system .... would be 4" all titanum ... ( i'll order it )

thanxx for the help guyzzz ..

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/#findComment-938671
Share on other sites
OMRAN Collaborator

OMRAN

Posted
  • Author
Posted
wow a lhd r34!.

well, first of all you should check out the HPI dvd issues.

They are fantastic and describe a step by step guide on how to do 11 seconds in a Pretty stock R34 GT-T and they manage to run 11.96 using standard engine and gearbox.

there should be some people in here that can have time on there hands to post up all the details.

thx

that would be good ...

but where do i get those from .... am from UAE ... and u know what .. most of the tunning sites are blocked .... f*&^

the GOV. here do not allow tunning ... or anything ... only if u wanna enter the drag so u'r car would be a drag cr .. not a street car ...

any way ... where can i find this dvd's ???

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/#findComment-938672
Share on other sites
OMRAN Collaborator

OMRAN

Posted
  • Author
Posted

redline2003 .....

yeah man .... one month ago ... a new rule have been set .... no right hand drive will be registered ... it must be converted ...

befor it was ok .. u can register it for 1 year and then u must converted ... ( if u r a police man .. like me .. :D or u know some one in the police department than u can keep it as a right hand ... ) ( my r32 still a right hand )

and i think .. the cars here is cheaper then australia ... i can get R34 gtr vspec2 for about 90,000 - 100,000 DH ...

that would be i think .. about 40,000 aus

coz our custom tax is only 4% ... u'rs i think .. about 100% ... thats what i have told .. coz i was planning to buy r34gtr and sale it in australia ...

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/#findComment-938675
Share on other sites
OMRAN Collaborator

OMRAN

Posted
  • Author
Posted
very nice looking 34 there mate :D quite like that colour too! Any pics of engine bay or interior? would love to see the diff with the LHD.

Also, your best bet for a dump pipe would be to get one custom fabricated for you... probably a bit cheaper than some of the jap brands too!.

Dave.

thanxxx man ....

i have some pic ... the problem is that the old owner did the convertion ... (that was a problem )

so there is many thing i didnt like about that .. for example ... the downpipe ... have been cuted (i'll post pic later .coz am at work now ) i think the down pipe would be 1" or 1.5" ... thats really bad ... but still i can do 0-100 in 6.5 - 6.6

dont forget our weather .. that would be 35 at night .. (who wanna live in UAE) :wassup:

any way ...

the main thing with LHD .. is the dashboard .. so most of the guys here .. cut the dash and switch the sides ... thats suck .. but in the other hand u still have the r34 dash

in my case

i have maxima dash fited .. wich comes .. some how the same size as the r34 dash

i'll post some pic .. later ..

about the down pipe .. i'v talked . to the guy in FOX exust (germany company) about that ... he said . he cant do it ..

what the f***

any way .. i'll be doin it ... myself ..

thats why am asking if the turbo is a bolt on turbo or not .. so i can do it now or after ..!!

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/#findComment-938995
Share on other sites
dAVE Grand Master

dAVE

Posted
Posted

even bolt on turbos need custom dump pipes... so best bet would be to wait til you have done your turbo!

500hp is a fairly high power output aim, so i would assume you would need to change the manifold etc as well anyway to reach those figures. Think most of those turbos are externally gated too, which means you would definately need to do manifold.

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/#findComment-939045
Share on other sites
OMRAN Collaborator

OMRAN

Posted
  • Author
Posted
even bolt on turbos need custom dump pipes... so best bet would be to wait til you have done your turbo!

500hp is a fairly high power output aim, so i would assume you would need to change the manifold etc as well anyway to reach those figures. Think most of those turbos are externally gated too, which means you would definately need to do manifold.

now u r talking ...

ok ...

what turbo u think will be the best ... for this power target .. ???

and what do i need to chang ... ?

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/#findComment-939110
Share on other sites
sol Newbie

sol

Posted
Posted

You could go to One of the workshops in Dubai and the could custom build a maifold for your car, they will also fit the intercooler and the fuel system for your car, I have tried them they are ok, they did my Nissan Patrol Turbo and intercooler ,they fit it with a Greddy 78 turbo and i was running 2 bar 800 rwd hp, I guess you will know me Omran Since i mentioned my car, fellows from austrailia

(its a NissanPatrol 2003 4x4 4.8l vtec) Fully Modified Stroker Engine One of many 4x4's that are custom made in the UAE. :flamed:

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/#findComment-939293
Share on other sites
OMRAN Collaborator

OMRAN

Posted
  • Author
Posted
You could go to One of the workshops in Dubai and the could custom build a maifold for your car, they will also fit the intercooler and the fuel system for your car, I have tried them they are ok, they did my Nissan Patrol Turbo and intercooler ,they fit it with a Greddy 78 turbo and i was running 2 bar 800 rwd hp, I guess you will know me Omran Since i mentioned my car, fellows from  austrailia  

(its a NissanPatrol 2003 4x4 4.8l vtec) Fully Modified Stroker Engine One of many 4x4's that are custom made in the UAE. :flamed:

soltan ....

maaan ..... long time no see ... where have u been ... i didnt know that u r in this forums too ...

congratulation for u'r new porsche turbo ..

about that shope i'll be goin out with u for some time .. if u r free ..

wait for my call .. mate ..

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/#findComment-939337
Share on other sites
OMRAN Collaborator

OMRAN

Posted
  • Author
Posted

GARRETT TURBOS !!

Turbo-SB8005 GT25 440hp AU$2590.00 Wastegated & Water-cooled

Comp T04S A/R .70 -Turbine A/R .86

Turbo-SB8005A GT30 500hp AU$2690.00 Water-cooled - use separate wastegate

Comp T04S A/R .70 -Turbine A/R .82

Turbo-SB8006 GT30R 600hp AU$2690.00 Water-cooled - use separate wastegate

Comp GT40 A/R N/A -Turbine A/R 1.06

Turbo-SB8006A GT30R 600hp AU$2690.00 Water-cooled - use separate wastegate

Comp GT40 A/R N/A -Turbine A/R 0.82

Turbo-SB8006B GT30R 600hp AU$2690.00 Water-cooled - use separate wastegate

Comp GT40 A/R N/A -Turbine A/R 0.63

Turbo-SB8007 GT35R 700hp AU$2690.00 Water-cooled - use separate wastegate

Comp GT40 A/R .70 -Turbine A/R 1.06

this info from TURBOTECH.com

any idea ?!

keep in mind no need for too much lag.

Link to comment
https://www.sau.com.au/forums/topic/45976-500hp-r34-gt-t/#findComment-939521
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r34killa
      General interior R34 questions

      By r34killa · Posted

      Hi everyone, I'm generally new to DIY projects, and I've browsed this forum and watched a lot of youtube videos but still have a few questions   Firstly, how does spray painting interior hold up? in particular like vinyl parts, my current mode of thinking is to use methyl spirits to take off original paint, clean/prep well, light coats, no primer or clear coat    Secondly, what is recommended for the headliner and, for example (my car is a r34), the A-pillars which are some kind of other fabric material, do you think I would be successful at retrimming these? or would it be better to go down the blacking out via Dupli-Color Vinyl & Fabric Paint    Any other advice / tips / tricks for refreshing/modernising these interiors?    Thanks
    • D.s
      WTB-R32 gtst front bar-sydney

      By D.s · Posted

      As title says  Pm a photo with what u have  Type m style would be good As Hidding a thick front mount
    • Duncan
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By Duncan · Posted

      Just note that when trying to find a short in a globe power supply, it is best to disconnect the globe as it will allow current through to earth. With it unplugged it is easier not to get confused. Also with the r32 wiring, the high beam has 2 power supplies (one when you push the switch forward and the other when you temporarily pull it back; so if it is the high beam blowing you will need to trace both circuits
    • dyl33
      R32 gtst Center bearing (brand new)

      By dyl33 · Posted

      $75 Location: Gold Coast  Can post via Australia post
    • GTSBoy
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By GTSBoy · Posted

      That's a short. Find the short. It will be somewhere between that fuse and the headlight. Start by removing the plugs from the back of the headlight and dimmer switches, and measure resistance to earth. Supply side (power from the fuse) should have none. The other side should have resistance compatible with whatever globe(s) is there (which is relatively easy to say for a normal globe, perhaps not as easy to say for LEDs). Anyway, if you have very low resistance, you defo have a short. Then you just have to run the wiring like you're running the bowel of a dog (on the operating table) that has swallowed something it wasn't supposed to.
×
×
  • Create New...