Jump to content
SAU Community

Recommended Posts

It's all about the car needing to meet certain criteria to be considered a "specialist and enthusiast vehicle" and in this case it did not meet the minimum power to weight ratio of 105kw/ton to be accepted.

It's all about the car needing to meet certain criteria to be considered a "specialist and enthusiast vehicle" and in this case it did not meet the minimum power to weight ratio of 105kw/ton to be accepted.

It was too slow.

And to be honest I'm not sure of the allure, 34GTT is cheap enough these days surely; the import cost is more than the auction cost.

Oh, okay. I wasn't really thinking of importing an HR34, I was just interested why it wouldn't be allowed to be imported.

Although the HR34 (2000cc non-turbo) can't be imported, you can still import the ER34 which comes in a 2500cc non-turbo version very cheaply .. possibly as cheap as $7,000 landed and complied for a sedan or $9,000 landed and complied for a coupe, and this is for decent cars with around 100,000km genuine and no accident history.

  • Like 1

Although the HR34 (2000cc non-turbo) can't be imported, you can still import the ER34 which comes in a 2500cc non-turbo version very cheaply .. possibly as cheap as $7,000 landed and complied for a sedan or $9,000 landed and complied for a coupe, and this is for decent cars with around 100,000km genuine and no accident history.

Yeah, I was looking at the 25GT-T sedan, particularly these: https://www.tradecarview.com/used_car/japan%20car/nissan/skyline/16516335/ https://www.tradecarview.com/used_car/japan%20car/nissan/skyline/16930297/

Edited by linuxfanatic

Please do not pay much attention to TradeCarView as there are a LOT of scams there and many of the cars either don't exist or are seriously misrepresented.

https://www.tradecarview.com/used_car/japan%20car/nissan/skyline/16516335/

If this car was real and genuine which there are reasons to doubt already, it would end up with a landed and complied cost around $16,000 in Australia.

https://www.tradecarview.com/used_car/japan%20car/nissan/skyline/16930297/

This one is a much better price for this sort of car and would end up costing around $7,700 landed and complied in Australia. You would still need to check the car for accident history and make sure it's genuine.

I would strongly suggest auctions as a better place to look, we can get bargains for you there and have every car checked out in person before bidding so there is no guess work.

Please do not pay much attention to TradeCarView as there are a LOT of scams there and many of the cars either don't exist or are seriously misrepresented.

https://www.tradecarview.com/used_car/japan%20car/nissan/skyline/16516335/

If this car was real and genuine which there are reasons to doubt already, it would end up with a landed and complied cost around $16,000 in Australia.

https://www.tradecarview.com/used_car/japan%20car/nissan/skyline/16930297/

This one is a much better price for this sort of car and would end up costing around $7,700 landed and complied in Australia. You would still need to check the car for accident history and make sure it's genuine.

I would strongly suggest auctions as a better place to look, we can get bargains for you there and have every car checked out in person before bidding so there is no guess work.

Thank you for the information. Can you please point me to the websites for the auctions?

Actually I can help you find suitable cars, have them inspected and bid on the good ones. Then once we have a car I will arrange import, compliance and everything else for you.

http://www.facebook.com/diyimport

I have been importing cars to Australia for more than 15 years and have been a Skyline owner and active SAU member for just as long.

Please PM me here or through Facebook if you want to see what cars are available. I am happy to help you from start to finish.

Actually I can help you find suitable cars, have them inspected and bid on the good ones. Then once we have a car I will arrange import, compliance and everything else for you.

http://www.facebook.com/diyimport

I have been importing cars to Australia for more than 15 years and have been a Skyline owner and active SAU member for just as long.

Please PM me here or through Facebook if you want to see what cars are available. I am happy to help you from start to finish.

Thanks. I'll PM you when I'm ready to buy :)

It's all about the car needing to meet certain criteria to be considered a "specialist and enthusiast vehicle" and in this case it did not meet the minimum power to weight ratio of 105kw/ton to be accepted.

I had no idea about this Craig... thank you very much!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
    • I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
    • As well as being risky WRT tipping off anyway. Yeah, I wouldn't expect it to move. Just measure from the rear one to the front one on the good side, then measure that same length on the wrecked side. You will find the notches in the pinchweld, and the jacking pad. Just spray a spot of marker paint or something there.
    • but any other area than the bulge you are talking about will just cave in then? The front driver side is pretty bent so I don't know if that will work the way it is now. I can still kinda make out where that bulge is/was but it looks like the position of it also changed due to all the mistreatment? Hard to tell
×
×
  • Create New...