R33 Enginemounts For 25/30?

[Spud2530]

Hey guys , what engine mounts are everyone using in there 25/30s in there r33? the car is a streeter so i want to leave the outside looking as factory as possible so i dont want to cut the bonnet up etc.

[steve200b]

4 cylinder Te cortina

[Spud2530]

Will they bolt straight up for me?

[Ben C34]

What's a bolt

[r32-25t]

Use the factory mounts, if you are using the factory over the top manifold then you will need to elongate the wholes to lower the engine a bit

[steve200b]

I put a 2530 into a s13 with no holes in the bonnet using cortina mounts

[Spud2530]

im using a freddy manifold but the hi mount turbo just hit bonnet, we'll try cotrina/rx7 engine mounts thankyou guys!

[Pr0x1mity]

The cortina ones work well. It DOES sit the sump pretty low though. If you can maybe try R32 ones.

IIRC Cortina ones are 36mm and R32 are 42mm. RX7 ones are 42mm as well.

All from the top of my head.

Im thinking of cutting some kind of 2mm (or so) slip in disc to go under the mount to space it up a tiny bit.

[Ruthr33]

Is this still r33? I've got freddy manifold. Was thinking just slot the mounts 19mm and use the stock mounts.. Split the 38mm difference. Is this rite?

[AngryRB]

Just follow the RB30 build guide, i did and had new holes drilled in the stock R33 mounts and bonnet closes fine with stock intake mani and heaps of room under the sump too.. too easy