Jump to content
SAU Community

Whiteline Klc109 Rear Sway Bar Endlink?


Recommended Posts

Hi,

Just wondering if these endlinks are worth their money as opposed to the supplied somewhat crude looking endlinks?

(It's for an adjustable rear end swaybar on an R33 GTST)

http://www.whiteline.com.au/product_detail4.php?part_number=KLC109&sq=12993

Cheers

Supplied endlinks

post-33912-0-46789500-1443372802_thumb.jpg

Edited by Torques
Link to comment
Share on other sites

Are they worth the money? Possibly not, depending on how much value you place on money more than any other consideration. If you asked the question "do they do anything?" then the obvious answer is, yes. They are like any other solid joint. They don't allow any slip before transmitting the forces to the suspension component. The reaction of the bar to cornering loads is sharper, quicker. Better. Worth the money? Probably. I haven't been able to justify buying them to myself yet.

Link to comment
Share on other sites

The HD ball link is a lot nicer and more durable than the horrible loop style arrangement.

If you purchase a Whiteline front and rear bar kit for the R and S chassis cars now; they actually include the HD ball links.

They also deal much better with angular misalignment than the loop style ones; as they often just pop the bush out of the eyelet.

I can supply these for a pretty decent price if you're interested; shoot me a PM.

Link to comment
Share on other sites

fair enough...but the Hardrace ones are half the price of the whiteline ones, what's your definition of expensive?

Yes, you're right .. the Whitlines are very pricey and don''t look that convincing.

I also found these:

http://www.ebay.co.uk/itm/2-X-NISSAN-SUNNY-N14-1990-1994-REAR-BACK-ANTI-ROLL-BAR-DROP-LINKS-/130864103104?fits=Car+Make%3ANissan&hash=item1e781bbec0

http://www.ebay.co.uk/itm/NISSAN-PATROL-1991-1997-FRONT-PAIR-STABILISER-ANTI-ROLL-BAR-DROP-LINK-x-2-/291282784503?fits=Car+Make%3ANissan&hash=item43d1ce90f7

But am unsure what dimensions (length) I need

Edited by Torques
Link to comment
Share on other sites

They look a bit skimpy at the connecting link (the straight part) but maybe I'm wrong.

About AUD 150 in the UK and that is after a 10% discount :(

Edited by Torques
Link to comment
Share on other sites

I mean for the price it should be top notch quality really ... it's a lot of money, almost what I paid for the sway bar itself

Funny you should mention that, i have heard vague rumours of them breaking. Not enough to make a "thing" of, but, just that i had read that a few times before so could be something to it.

Link to comment
Share on other sites

I think they only look skinny in the middle because the ends are so bulky. I mean, face it, they don't look like they are made of smaller material in the middle than any normal end link. That's got to be ~8mm threaded rod at the connection there.

Link to comment
Share on other sites

I think they only look skinny in the middle because the ends are so bulky. I mean, face it, they don't look like they are made of smaller material in the middle than any normal end link. That's got to be ~8mm threaded rod at the connection there.

The connecting threads are M10.

The only "Failures" I've seen are the result of people not tightening the locking nuts on the threaded section or on the aluminium "Turnbuckle" section; which allows the tread to fret, and eventually fail.

Link to comment
Share on other sites

OK, thanks ..

Would anyone know how much 'preload' there is on these bars?

I mean how much do I have to adjust the length of the connecting links?

(with the car on the ground)

The connecting threads are M10.

The only "Failures" I've seen are the result of people not tightening the locking nuts on the threaded section or on the aluminium "Turnbuckle" section; which allows the tread to fret, and eventually fail.

Link to comment
Share on other sites

  • 2 weeks later...

Yes, sorry I didn't made my question clear enough.

I was concerned about the length adjustment of the end-links.

There's no such thing as "pre-load". With the car on a level surface there are no forces acting on an ARB.

Link to comment
Share on other sites

I guess the best (most centralised) adjustment will depend on your ride height. Realistically the setting you're looking for will be to ensure it doesn't bind/hit anything at your max bump or droop likely to be experienced.

The other consideration is that you might tweak the length of the links depending on which hole you have the bar set to. Probably only talking ~1 thread adjustment there though!

Link to comment
Share on other sites

I bought a set of the "expensive" Whiteline ones off Dale because the ones supplied with the bar sat at a bit of an awkward angle. They have withstood a hammering on the track with the weight of my 1800kg Stagea on slicks being thrown into corners so I don't think they are too fragile...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



×
×
  • Create New...