Jump to content
SAU Community

Recommended Posts

Selling my twin setup.

Engine always maintained, oil and filter change every 5000km with Penrite 15W50 diesel, so turbo bearings perfectly clean. Street driven, daily driver with the monthly mountain runs. Never tracked and oil temperature always sat at about 75 degrees never exceeded 90 degrees.

Ran the turbos at 26 psi for a short time but at 23psi for 95% of their lives.

Setup was designed to maximise response with free flowing dumps and front pipe.

Done about 60000 kms

Location: Melbourne

Prices: Negotiable, sensible offers will be considered

Contact me via pm.

Thanks.

TURBOS

2 x Garrett 2860 -5

Heavy duty actuators

Perfect condition

No shaft play.

The rear was rebuilt at 30000km due to oil line issue.

Price: $1500

post-89815-14436658631191_thumb.jpg

post-89815-14436640831646_thumb.jpg

post-89815-14436641119396_thumb.jpg

post-89815-14436641316718_thumb.jpg

post-89815-14436641582191_thumb.jpg

TOMEI DUMP PIPES

Old style with larger diameter 73mm compared to the newer 68mm from memory.

Highly sort after.

Flanges and welds in perfect condition

Price: $600

post-89815-14436644723458_thumb.jpg

post-89815-14436644833699_thumb.jpg

FRONT PIPE

Very well made mild steel front pipe

Custom 3.5 inch collector with 3 bolt flange. A bung is on the collector to run a Bosch wideband O2 sensor. Modifications were made to assist response and eliminate the 3 inch restriction on most other front pipes. Will bolt straight to factory position but you will need to weld a 3 bolt flange to your cat back.

I have heat wrap on them at the moment but quite happy to take it off and spray them black for the buyer.

Price: $500

post-89815-1443665772219_thumb.jpg

post-89815-14436657959711_thumb.jpg

post-89815-14436658094732_thumb.jpg

Edited by XGTRX
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...