Jump to content
SAU Community

Recommended Posts

Another track day completed. This time at Winton with @ActionDan 's club. Was a good day out. Drove there and back 500km+ blitzed my old pb by 4.5 secs, happy days.

Ended up with a best of 1.37.75 unfortunately this wasn't registered on natsoft as it was the last lap of the day and the red light to signal end of session was on when i crossed the line. Red light came on with 2 corners to go. I knew i was on a pb lap so i kept going. 

Car ran good, no dramas to speak of, was pretty solid all day.

Some racechrono data 
Screenshot_2018-05-07-20-47-41-05.thumb.png.6b743fb511267802adcb6f491f6000c9.pngScreenshot_2018-05-07-20-47-52-39.thumb.png.60cc56a53ffa29a200d6a636e75eb338.pngScreenshot_2018-05-07-20-48-28-26.thumb.png.c0c0348a42f3fe0cef9f26e3c22891cd.png

Managed to get up to 195 km/h down the relatively short straight, that was in 4th gear reving its guts out, surprised it didn't hit the 7800rpm rev limit considering the 4.3 diff ratio which worked beautifully around the boob section and ensured i was at the right revs.

Screenshot_2018-05-07-20-49-52-18.thumb.png.46c9821606b6ed205a1bcacb3d43f419.png

 

Apparently, i finished 2nd in class which was good. That was with my natsoft recorded time of 1.38.62 First was 1.38.43 if my final lap had counted i could have been first, oh well, shit happens, lol. Ultimately, very happy to be in the 37's, the goal was a 39.9.

Video coming soon.

  • Like 2

@Dose Pipe Sutututu This one is for you. Golf R with intake, exhaust and tune. 200 awkw, has brake upgrade, coilovers, some neg camber dialled in, track alignment and Nankang AR-1 tyres.

 

Golfs are gay and should be used to go to your local golf club, chopped brah. Skyline 4 eva. 

 

 

  • Like 3

Oh yeah, on the way home, about 5 minutes from home actually i had a squirt with an A45 AMG, first rolling, A45 got left behind by a fair margin. Then he wanted to go at the lights (on a private road obviously), antilag engaged with the Ar-1 still on, the boat launched perfectly and left the A45 in it's wake. Skyline with antilag and r specs > A45 with launch control. Was a good way to cap off an already excellent day. 

  • Like 5
12 hours ago, admS15 said:

@Dose Pipe Sutututu This one is for you. Golf R with intake, exhaust and tune. 200 awkw, has brake upgrade, coilovers, some neg camber dialled in, track alignment and Nankang AR-1 tyres.

 

Golfs are gay and should be used to go to your local golf club, chopped brah. Skyline 4 eva. 

 

LOL your car has like 15~20k worth of mods!

 

1 hour ago, Dose Pipe Sutututu said:
LOL your car has like 15~20k worth of mods!

 

To be honest, the car owes me less than 20k total, i bought the car for 10k to start with. Most of the parts used to buid it where 2nd hand, other than the turbo $850, injectors $800, dump pipe $170 and wide band $270. Everything else was cheap cheap ebay, gumtree, sau specials. I can list everything if you really want.

 

Thought id post that vid with the golf up since you've said on many occasions that a lightly modded golf r would chop a modded boat. Winton suits the golf better than the boat too, its not really a horsepower critical track, although horsepower allowed me too walk away down the straight.

 

Theres definitely a couple more seconds to be had at Winton, need to properly sort and set the suspension, height adjustment, corner weight etc.

 

hahaha damn, I've seriously done something wrong then :(

Can't even get under 1m8s at Wakefield Park where a Golf R can do the same time... new setup should be ready for July battles, I hope that changes my mind.

Try softening up your front ARB to reduce understeer?

hahaha damn, I've seriously done something wrong then [emoji20]
Can't even get under 1m8s at Wakefield Park where a Golf R can do the same time... new setup should be ready for July battles, I hope that changes my mind.
Try softening up your front ARB to reduce understeer?
1 min 8 is no slouch. Interested to see the new setup go. Should blow golfs out of the water and scare many hondas, lol.

As far as ARB's, it could help but the car is sitting so high it still rolls a fair bit. More camber will help but street car brah.

I think its about time i cough up some dollars and take it to a professional to set up properly and advise a course of action. It does handle quite well at Sandown and ok at PI but Winton shows its inadequacies.
1 hour ago, admS15 said:

1 min 8 is no slouch. Interested to see the new setup go. Should blow golfs out of the water and scare many hondas, lol.

As far as ARB's, it could help but the car is sitting so high it still rolls a fair bit. More camber will help but street car brah.

I think its about time i cough up some dollars and take it to a professional to set up properly and advise a course of action. It does handle quite well at Sandown and ok at PI but Winton shows its inadequacies.

perhaps make a splitter Bill, that would help so there's no need to reduce the ARB hardness

  • Like 1
perhaps make a splitter Bill, that would help so there's no need to reduce the ARB hardness
That would definitely help and is on the cards as well as the other stuff. Just got to work out if i do it with the current bar or use a stock spare one i got.

The only thing that bothers me about all this is the list of things that are getting removed and refitted for track days is growing.

First it was just wheels and tyres, then boot lid and wing, roll cage cross brace, rear seats etc. Now we're talking about splitter and possibly front bar. Things we do to go fast... Lol
  • Like 1
hahaha damn, I've seriously done something wrong then [emoji20]
Can't even get under 1m8s at Wakefield Park where a Golf R can do the same time... new setup should be ready for July battles, I hope that changes my mind.
Try softening up your front ARB to reduce understeer?


The question is, what generation of Golf R that you can’t keep up with?
 

The question is, what generation of Golf R that you can’t keep up with?

 

The answer to that for me is none that I've come across yet. 

The 33 has beaten a few 7's with apr kits at Sandown as well as some Audi's and A45's.

 

Yes, surely there is some quicker vw's, Audi's, mercs out there but same with skylines.

 

The point is, you still need to throw a decent amount of $ at them to go quick and they're not insanely quick out of the box, although much quicker than a bog stock skyline and much easier to live with as a daily.

 

 

 

 

 

 

 

1 hour ago, Count Grantleyish said:

 


The question is, what generation of Golf R that you can’t keep up with?

 

MK7, they're fast man!

Going to upgrade the missus car to that when we get back from our trip! Will probably take the daily to the track more than the boat LOL

The answer to that for me is none that I've come across yet. The 33 has beaten a few 7's with apr kits at Sandown as well as some Audi's and A45's.
 
Yes, surely there is some quicker vw's, Audi's, mercs out there but same with skylines.
 
The point is, you still need to throw a decent amount of $ at them to go quick and they're not insanely quick out of the box, although much quicker than a bog stock skyline and much easier to live with as a daily.
 
 
 
 
 
 
 


Yep, these euros are dear as poison to go fast.

MK7’s are pretty capable for what they are considering how held back they are from the factory although same can be said for all cars.

Also it’s down to how brave the driver is.
MK7, they're fast man!
Going to upgrade the missus car to that when we get back from our trip! Will probably take the daily to the track more than the boat LOL


Yep, they goes alright.


Yep, these euros are dear as poison to go fast.

MK7’s are pretty capable for what they are considering how held back they are from the factory although same can be said for all cars.

Also it’s down to how brave the driver is.
Agreed on all points.
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Hope the cans went down well at least 
    • 255 can't go wrong with the price.
    • When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...