Jump to content
SAU Community

Recommended Posts

16 minutes ago, MBS206 said:

Driving on the weekend, air con on full blast, opened a window as dog wanted to get smashed in the face with bugs.

No difference in temp, may as well drop all the windows and run full flow air!

 

Obviously these guys live further south in cooler climates where AC continues to operate 馃槢

I'm down south. It seldom gets hotter anywhere else in the southern cities than it does in Adelaide. When we get 40掳C, it's usually for a week at a time. My aircon works, and works well. I just don't need/want it in most circumstances. Even driving home from work in the afternoon for 45 minutes, where the air over the road might be 45掳C, I prefer the windows down.

In fact, I use it so seldomly that I needed to get it regassed because it all leaked out somewhere and we couldn't find where, and I really should use it every week to keep the seals wet....but I always forget. It's probably been 2 months since I last remembered to turn it on.

I use AC every time I drive the car. Something* makes the car pretty warm simply by existing. It's how I know the car is truly up to temp, water temp, oil temp, cabin temp.

That said it'll be ~22 and keep the temp down on a 40 degree day. There's no excuse for the deletion of aircon. Ever!

 

  • Like 2

No. It's all Aluminium! :p. And that's the point I'm making, I wouldn't have done it if I couldn't retain AC!

I recently drove it with the center console out, I had thought it was gearbox heat. However after driving it for about an hour, the shifter was still cold and all the heat shielding from the tunnel was working great.

I now think it's the fact that there's headers running behind the steering wheel/infront/underthe driver, and the fact you can feel your ankles warmed when you step out of the car seems to suggest that too.

In any case yeah. Aircon sure is great.

  • Like 2

I seem to recall my VT2 SS with LS1 6 speed getting freaking hot around g/box on long drives. Always assumed it was the box but thinking about it now, there was pacemaker headers either side of it going into twin cats. Greg your assessment of where the heat coming from, sounds about right.

I've got a 10L one, love it. 

Also have the basic SCA parts washer, that mostly sits there as an extra work surface but is very handy when needed. 

 

Edited by No Crust Racing
17 hours ago, GTSBoy said:

I'm down south. It seldom gets hotter anywhere else in the southern cities than it does in Adelaide. When we get 40掳C, it's usually for a week at a time. My aircon works, and works well. I just don't need/want it in most circumstances. Even driving home from work in the afternoon for 45 minutes, where the air over the road might be 45掳C, I prefer the windows down.

In fact, I use it so seldomly that I needed to get it regassed because it all leaked out somewhere and we couldn't find where, and I really should use it every week to keep the seals wet....but I always forget. It's probably been 2 months since I last remembered to turn it on.

willing to swap your A/C setup for 2 x window switches?

  • Haha 2
10 hours ago, MBS206 said:

So to slightly less de-rail this thread, and bring it back to an earlier, slightly more on topic discussion, Look at what the algorithm is pushing at me...

f**king algorithms...

I'm not willing to click on any unlabelled external link; but I assume it is a hand held device intended to replace a wife

  • Haha 1
34 minutes ago, DaymoR32 said:

willing to swap your A/C setup for 2 x window switches?

Heh. It might be worth it. I turned it on last night because the thunderstorm was causing fogging inside the car. I don't think the compressor came on, meaning that the gas has probably made an exit somewhere. f**ken.

  • Haha 2
1 hour ago, GTSBoy said:

Heh. It might be worth it. I turned it on last night because the thunderstorm was causing fogging inside the car. I don't think the compressor came on, meaning that the gas has probably made an exit somewhere. f**ken.

Now imagine you had working AC, higher quality of life.

12 hours ago, Duncan said:

I'm not willing to click on any unlabelled external link; but I assume it is a hand held device intended to replace a wife

It's safe, I didn't hide it in the quote of someone else :P

 

it was a link to a Facebook video, advertising Vevor 10L ultrasonic cleaner, and they cleaned 6 pistons while still on their rods in it.

 

Been driving the 33 to work past couple of days, have clocked up 350km and decided to change the oil and filter. Going to run some cheap mineral oil for the next thousand KMs. Got some nulon 15w 40 premium mineral oil for cheap off eBay. $28 delivered. It arrived today. Looks like Fastway can actually deliver unlike couriers no thanks.

Break in oil came out looking very clean as one would expect. I cut the filter open and was happy to not find any traces off stuff that shouldn't be there. New filter was fitted and oil filled. Noticed a small coolant drip past couple of days, was coming from lower rad hose clamp. Gave it a little more tension, all good again. 

Went for another little drive in the arvo, pretty close to 400km done so far. Haven't thrashed it's tits off quite yet, maybe after another 200km.

 

IMG_20231213_181348557_HDR.thumb.jpg.9c3b4a4e51c21c947a35293d58fb8fd3.jpg

  • Like 5

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Might piggy back off this thread since there's been a good discussion about PWM.   I purchased a Walbro 460 F90000267 and have been looking into PWM to understand it. It was purchased more of a future proof as my original OEM fuel pump died (r33 below 200kw) and figured I'd just upgrade it to this. That's when it hit me that a pump this big can cause more dramas with such high amperage draw and heating of the fuel pump being on 100% all the time in such a mild setup.   I have a Nexus R3 and slowly collecting power mods but I was looking into the PWM feature on the NSP software:   Then looking at the graph from the fuel pump:     Am I safe to assume reducing duty cycle to 50% for example would make the pump run like a 230/lph ? Where does the PWM come in all of this ?   I've gone down the rabbit hole of PWM fuel pumps and it seems there are many differing opinions on how to go about it 馃槄  
    • Thank you, this will keep me busy for a bit.  I will update progression.
    • That specific one would be an exchange part, meaning I'd have to send mine to them. Plus it looks like a non AWD sump, which won't work for me. There is one or two shops in my country that I can ask to do a sump extension job and it'd most likely end up being cheaper than sending mine to AUS or NZ and getting one back, and quicker too.
    • Rear turbo is leaky, most likely at the oil drain. From what I could see with my boroscope it seemed to have seeped out at the very top of that return hose. Is it possible that the oil climbs up that hose to then leak out? Yup, coolant leak on the hot side of the engine, only noticed after seeing clear rusty residue in the block right from the turbo oil feed downwards to the pan, and red droplets hanging from the pan. No clear sign yet from where it comes, and most of the lines there are hardlines right? Last year, seeing those red drops, I thought it was power steering, will be glad if that is not leaky at least. Another leaking hose I found by chance is the lower of the two heater core hoses coming from the firewall to the back of the head. That one is not too bad to get to if I have to replace.
    • I think for response I'm already kind of out there no? he -5s are not the best pick for that as the Internet tells me. Maybe I should switch to -7s while I still can? Though that almost definitely warrants an engine pull along with the other issues I have.
  • Create New...