Jump to content
SAU Community

Recommended Posts

Hi guys,

I've recently become the owner of my first Skyline (model in title) and have been perusing this forum before and after my purchase, which has been an absolute help to me and was wondering if anyone could help shed some light on a problem I've been having.

Problem 1: When I put my foot hard down, going into the high RPMs, it feels like the engine struggles a bit, gives a little then goes back up then gives a little then continues on, almost like lagging a bit - anyone familiar with this problem?

Problem 2: I have had an engine light issue "half diagnosed" where the engine light, TCS OFF and SLIP light comes on. Was plugged into a scan tool and all I got back was "Ignition Source Primary" which the mechanic and I both thought that the coils were on the way out. Any help with this one would be good. Seems to disappear when I turn the car back on after some time.

First problem I thought may have been a faulty CAS or slightly out of position or dodgy fuel injectors. The second problem I think the coils, but I'm very beginner when it comes to the mechanics.

Thanks a bunch guys

AFM

Weak spark

Boost leak

Sorry can you be a little more specific on what those are exactly. The car is basically stock, only aftermarket parts are some strut bars

I am partly insinuating that you should google say "afm problem skyline" and see if the symptoms match your description.

And your issue can be taken as miss fire which is caused by a weak spark.

A boost leak would also cause hesitation while driving.

However none of these can be adequately diagnosed over the Internet and will require a lot of research on your behalf.

...

First problem I thought may have been a faulty CAS or slightly out of position or dodgy fuel injectors. The second problem I think the coils, but I'm very beginner when it comes to the mechanics.

...

Faulty CAS would be my guess too, I had a pretty similar experience: http://www.sau.com.au/forums/topic/326043-resolved-misfire-in-r34-gtt-rb25det-neo/

I reckon RB25's actually come with misfire built in, never seen an engine with so many things that could cause a stutter... ;)

  • Like 1
  • 4 weeks later...

...plugged into a scan tool and all I got back was "Ignition Source Primary" which the mechanic and I both thought that the coils were on the way out

And you're 100% correct, this *IS* the problem. The packs will initially fault when warm (continuity in the circuit breaks) when cold continuity is fine. The simplest answer is often the correct one. Every other fault people are listing *WILL* give a different error code, primary ignition = coil packs, no ifs or buts.

Replace all the packs with Splitfires and don't look back!

  • Like 1

And you're 100% correct, this *IS* the problem. The packs will initially fault when warm (continuity in the circuit breaks) when cold continuity is fine. The simplest answer is often the correct one. Every other fault people are listing *WILL* give a different error code, primary ignition = coil packs, no ifs or buts.

Replace all the packs with Splitfires and don't look back!

As I suspected too, real shame.

I know every man and his dog suggest Splitfires for these but I don't have that much on me outright otherwise I'd love too.

Was looking at these el cheapo ones that come with a one year warranty until I can save some dough for the Splitfires and not have my R34 running on 5 cylinders http://www.ebay.com.au/ulk/itm/221665070389

Anyone know much about these? "Japtek". I know you get what you pay for but its just something to tie my over

Poor man pays twice. They should be ok for stock power levels but do expect a failure. As above comment, your better off just driving easily, gap the plugs down to .6mm and save for oem or split fires.

Couldn't agree more, I'm pretty novice when it comes to these cars, haven't had mine long (took me about 3 hours to change my plugs, fun but time consuming and trial and error), so I wasn't sure if I should find a cheap set to tie me over or if running with coils on the way out is bad for the engine or not. I don't really hoon around so I think I should be okay.

Have u closed the gaps down? That will help

Now that you think about it.... haha

Yeah, I bought the NGK 1.1's that everyone had recommended and gapped them down to 8's.. think gapping them down to 6 is really going to help?

Now that you think about it.... haha

Yeah, I bought the NGK 1.1's that everyone had recommended and gapped them down to 8's.. think gapping them down to 6 is really going to help?

It should. Give it a go. Can't hurt

.......don't buy OEM either, you'll end up with the same problem down the track.

It's true Splitfires aren't cheap, and it hurts to buy something that feels like a complete non-value adding component (like damn tyres) but you seriously never look back and they can take pretty much whatever you throw at them future tune-wise.

The gift that keeps on giving!

.......don't buy OEM either, you'll end up with the same problem down the track.

It's true Splitfires aren't cheap, and it hurts to buy something that feels like a complete non-value adding component (like damn tyres) but you seriously never look back and they can take pretty much whatever you throw at them future tune-wise.

The gift that keeps on giving!

OEM are more than capable and have been proven time and time again to handle big power and be more reliable than aftermarket. People usually go split fire because they're cheaper. People have problems with oem because they have 20+ year old units and expect them to make 300+kW. My 20 year old coils are still going, when the time comes I know what I will be replacing them with.

.......don't buy OEM either, you'll end up with the same problem down the track.

It's true Splitfires aren't cheap, and it hurts to buy something that feels like a complete non-value adding component (like damn tyres) but you seriously never look back and they can take pretty much whatever you throw at them future tune-wise.

The gift that keeps on giving!

Do splitfires last 20 years?
  • Like 1

Do splitfires last 20 years?

I know they last 11 years.....and counting.....

Those familiar with the R34 OEM coilpacks can tell you that they suck. My original R34, the OEM set started playing up in 2004 (5 year old car at the time) I actually replaced them with SII R33 packs which seem to be made of sterner stuff as they worked fine, but they don't fit well at all due to bolt pattern.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • thanks mate, one of the reasons I even bought it to be fair.
    • I found parts on EFI Solutions webshop that seemed to be the accurate ones. I haven't gotten around to fitting the turbos back on the car yet since I still have to deal with the shitty crack in the engine block. But I'm confident that the bolts I ordered will fit. According to EFI they are also 7-16/24. The reason M11x1 got involved here is because it is apparently very similar to 7-16/24.
    • Well, to be fair to the car I've driven it daily for almost a decade now, although in that time only put on 50k, as it just recently passed 100k miles early this year. For the most part its been fine because I've been able to source parts from AUS like jacks jdm and a few places in Japan, some things like pads have been easy since 300z pads swap right in... I realize its probably at that time in its life i should find a new DD (but I rent and only have so much space, no garage) so new cars just complicate things. As it is older though, I recognize its about that time as with my '67 GTO to maybe side step and find an alternative, but if i can keep driving it... I want to.   That said, I may just look into a local shop that might be able to, problem is the mechanic I work with has limited space as a mom and pop operation, and he's a busy busy man, so id need to find out if he can keep the car in the meantime, which may or may not be practical for him. Maybe I'll just buy one off jacks jdm and get that refurbed /shrug.. just looking at options and what others may have to offer for advice on the matter. Like I said, its hard finding people around here who actually have one, I've had mine 9 and a half years and I've met 3 others, and they are all military, one was oem from 95 with 30k miles (rip that car... guy got hit after someone crossed s double yellow, totaled it)
    • I've noticed my rear springs sag a bit compared to the fronts. I have stock springs and KYB struts. The front wheels are pretty consistent in their ride height, but compared to the front wheels, one of the rears sits 20mm lower, and the other 40mm lower. This negatively affects the ground clearance, and also angles the headlights up. What are some some economical options for new springs? Or information like good spring rates, lengths  in order to find a suitable replacement etc Far from lowering the car, I'd prefer to raise it a bit to keep it ground clearance friendly.
    • I searched for ages as well, I'm importing an engine to get the head off it. 
×
×
  • Create New...