Jump to content
SAU Community

Brake Upgrade Front Only Bias Issues?


Recommended Posts

Just wondering if there are any bias issues with upgrading only the front calipers from 32 sumitomos to 33/34 brembos?

You may want to consider a different master cylinder to match the piston areas so you don't end up with a long pedal.

Link to comment
Share on other sites

if it really bothers you, just upgrade the rears too :)

OR... run a tiny bit wider rear tyres as theoretically the rears would lock easier

This is my concern, that the ABS will be fighting the rears and i will lose overall performance - i have the fronts on at the moment, just weighing up whether or not to buy rears before i head to the track next

You may want to consider a different master cylinder to match the piston areas so you don't end up with a long pedal.

Pedal feels ok at the moment, may be a different story if i look at larger rears as well

Link to comment
Share on other sites

This is my concern, that the ABS will be fighting the rears and i will lose overall performance - i have the fronts on at the moment, just weighing up whether or not to buy rears before i head to the track next

Pedal feels ok at the moment, may be a different story if i look at larger rears as well

The ABS in the R32 is rubbish anyway - it is slow and generally pretty ineffective. Just be thankful its not all of that and leaking as well. I have found the Brembo setup with the Vspec master cylinder to be a little rear biased in any case so if you are happy with the pedal travel it is probably not far from being ok.

Did you fit a master cylinder stopper?

Link to comment
Share on other sites

I've upgrade the fronts on my 32 GTS4 to GT-R fronts, without any noticeable effect on brake bias.

Given that the majority of the braking is done at the front, doing a bit more at the front shouldn't be a problem.

Link to comment
Share on other sites

Its part of the reason why AP 6 pots are such a great upgrade for R32s with bigger rotors. Get more pad area, get more rotor so it all dissipates heat miles better than std but uses small pistons to reduce some of the braking torque you are gaining by going to a bigger rotor and better pads. So two steps forward and one step back means you still end up with nice front to rear balance on an R32 with std booster/masters.

If you go to a caliper with bigger pistons, and bigger rotor and higher u pad well you are doing 3 things that are all going to increase your front braking torque and in turn front bias meaning you are going to be locking brakes like a champion. ABS masks a lot...those of us without ABS tend to be a little more "canary in a tunnel" and sensitive to the differences between various setups

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I got the full frenchys kit too. Really awesome kit. Easy to install my only complaint was the hardlines I think could be routed differently (I modified mine) but I realise the kit needs to suit multiple applications. This was the hard lines before I modified them. They were touching the wastegate pipe. I ended up reducing the distance between firewall and first bend. The made it so they tucked along the frame rail.
    • Deeve, I don't suppose that you've made any progress on this? My Stagea has the exact same problem, and just like you, I've read through as much as I can online, with no real progress. My car isn't throwing any codes at all, which is a little frustrating. I've changed plugs, checked the wiring and harness. A new MAF gets here next week, but I'm not hopeful it will solve the issue.
    • I installed it all myself,  It was really easy to install.  I got a professional to do the degas/gas.
    • Finally had some time after working on other projects to jump back on this thing. Pulled all 4 wheels to check the brakes over and lucked out, only needed to bleed them/change fluid to get everything working!    Took it for its first quick spin (around 2km) up the road and ran great! Sounds like I have a left rear wheel bearing that needs replacing and there’s a shake in the steering wheel but the tires are absolutely junk on this thing and had been sitting flat when I went to first look at the car so we’ll see if that’s the cause.   Tach randomly started working but I notice if my hicas light comes on the tach stops working 🙃 yay for electrical gremlins 
    • Bunnings car park it is! if you buy the kind of dampers with the adjustable top on the strut you can see it, red, purple? So many options.
×
×
  • Create New...