Jump to content
SAU Community

Recommended Posts

Hey all,
I have just upgraded my suspension from king springs and shocks,
To Gecko G-racing coilovers,(13kg front and 8kg rear)
still playing around with the dampaning setting but from the factory settings these are
Very comfortable for street use. I drive my daily 2 months on these coilovers
and I'm impressed with the comfort. I went to Huntley hill climb(Dapto NSW) and knocked 2.5 seconds off my time !!.
when to the last driving sports event and the car feels amazing, its a lot more predictable and easier to
control. all for $1250 I'm impressed. bought them via ozmotorsports (02) 42281250

post-141731-0-36834000-1447027369_thumb.jpg

post-141731-0-52624800-1447027486_thumb.jpg

post-141731-0-13483200-1447027488_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/460898-gecko-coilovers-testing/
Share on other sites

Nah mate that's ok NSW is a bit of a drive from home.

All I would say is a couple things, actually make that three.

1. Having the damper set soft makes springs feel softer. It is not a good thing however as generally underdamped springs tend not to handle as well as they should.

2. Same, same for under inflated tyres.

3. Hillclimb speed is usually about confidence. It is common to go seconds faster as you build familiarity with the circuit.

Anyway good luck to you if you are happy with your car & suspension. Just not sure 13kg and comfortable belong in the same sentence. Your car would have left the factory with a spring rate 3kg/mm or less.

not recommending anything, just wanted to slap up a post,
damper settings are on 10 front 0 rear
I run 16inch mesh wheels on the street with 205/55 At 34 psi.
yes might have gain more
confidence but the car handles better(the king springs were rubbish)

kings springs as thats what the can came on

currently have stock sway bars looking to upgrade to superpro/whiteline bars

open to advise, here to learn.







FYI, when you make the front springs harder in increases the tendency to understeer. GTRs are worse than GTSTs due to the extra weight at the front due to the 4WD kit. If you find it understeers too much, reduce the front spring rate, then play with anti-roll bars. Similar to springs, you want to reduce the rate at the end where you need more grip, or increase the rate at the other end.

FWIW i've gone from 10/8 to 8/6 to 7/6. If i had your car the first thing i would do is put 10s in the front.

  On 09/11/2015 at 12:07 AM, r32forthewin said:

Hey all,

I have just upgraded my suspension from king springs and shocks,

To Gecko G-racing coilovers,(13kg front and 8kg rear)

still playing around with the dampaning setting but from the factory settings these are

Very comfortable for street use. I drive my daily 2 months on these coilovers

and I'm impressed with the comfort. I went to Huntley hill climb(Dapto NSW) and knocked 2.5 seconds off my time !!.

when to the last driving sports event and the car feels amazing, its a lot more predictable and easier to

control. all for $1250 I'm impressed. bought them via ozmotorsports (02) 42281250

Is it just me or does this sound like a massive sales pitch?

Spruiking a new product?

  • Like 1
  On 10/11/2015 at 4:07 AM, MrStabby said:

FYI, when you make the front springs harder in increases the tendency to understeer. GTRs are worse than GTSTs due to the extra weight at the front due to the 4WD kit. If you find it understeers too much, reduce the front spring rate, then play with anti-roll bars. Similar to springs, you want to reduce the rate at the end where you need more grip, or increase the rate at the other end.

FWIW i've gone from 10/8 to 8/6 to 7/6. If i had your car the first thing i would do is put 10s in the front.

what sized sway bars would you recommend?

  On 10/11/2015 at 10:21 PM, r32forthewin said:

what sized sway bars would you recommend?

Not really sure. I just got the whiteline adjustables. Front is set to full soft and rear is full hard, again to reduce understeer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which are almost all nonsense. Ignore. Obviously enough, if it is not a porous block, then any such thing is a waste of time. External block surface? Would be a waste of time, if the block was actually porous. It would need to go on the inside, which is inaccessible, and even if the block was open deck so that that area was acessible, it would be unlikely to work. But seeing as this is all nonsense, stop worrying about it.   If the coolant is coming from the side of the block it is 10:1 odds that it is either a welch plug, or it is coming from the head gasket. Maybe from one of the coolant lines feeding the turbo, or even the heater. Liquids that leak from up high can travel sideways along casting surfaces or pipes, etc on the engine before finding a spot from which to drop.
    • Yeah rust is sadly also a bit of an issue on my car. Doubt there is many cars out there that actually have no rust in those aeas. The strut towers look fine but some of the surounding metal sheets show a bit of brown cancer peeking out from in between. I hope I can make do with external remedies and won't have to rip open the whole front end anytime soon. It looks somewhat minor compared to some shit I have seen online. I have worked on a few cars but I expect the RB26 to be my first 'engine out' job at some point.
    • Welcome Jan, It's very likely that you are in over your head. You'll just have to learn to swim hard and fast! These old rust buckets have more ways to bankrupt us than almost any other car. But hopefully there's nothing wrong that ruins the whole show! We can help a fair bit. There's plenty here who've been fixing these things for >25 years. cheers
    • Hi all. First off, thanks for reading my post. So end of last season I put the car away knowing I was leaking at least two fluids. One of them being rear turbo's oil. I went to my car recently that is waiting in a garage to take a peek with my boroscope to try and see if I can narrow down the souce of oil before taking it out of storage. What I found is not so great I think. The rear turbo is (probably) leaking from the oil drain. The hose and it's clamps are probably the original ones, so most likely just worn out or loose. However I spotted a line of rust going straight down from the turbo oil feed, as if water leaked out of there at some point. Also explains the red liquid that was dripping from my front subframe, which I initially thought was power steering. I can even see coolant drops hanging off the side of the oil pan as well. After a quick hit on the web I found a select few discussions about porous engine blocks. My question is if the pics of the turbo oil feed and the left hand side of the block (imgur link below) looks like it could be exactly that to you. Maybe someone in the community has seen it before and knows what it looks like. If it actually is a porously leaking block, has anyone attempted at fixing it with simple methods like putting a sealer in the cooling system and using something like jb weld on the block surface, or will it just leak in 2 weeks again? I could not find any detailed info or pictures on this topic. If I need a new engine, tell me softly. https://imgur.com/a/knVvmZ8
    • Hey all. I'm 23 and from Germany, September last year I bought a mildly modded 1995 GTR Vspec. Looks great and was fun so far, but I already have a list of issues of various severity that I need to take care of, potentially growing longer the closer I look. I just hope I'm not in over my head, I really want to keep the car and work towards it becoming great. I hope y'all will help me out in getting there, I am positive I will need help sooner rather than later to figure out how to proceed. greetings, some pics of the car I posted to imgur. https://imgur.com/a/StKkabz
×
×
  • Create New...