Jump to content
SAU Community

Recommended Posts

Hey all,
I have just upgraded my suspension from king springs and shocks,
To Gecko G-racing coilovers,(13kg front and 8kg rear)
still playing around with the dampaning setting but from the factory settings these are
Very comfortable for street use. I drive my daily 2 months on these coilovers
and I'm impressed with the comfort. I went to Huntley hill climb(Dapto NSW) and knocked 2.5 seconds off my time !!.
when to the last driving sports event and the car feels amazing, its a lot more predictable and easier to
control. all for $1250 I'm impressed. bought them via ozmotorsports (02) 42281250

post-141731-0-36834000-1447027369_thumb.jpg

post-141731-0-52624800-1447027486_thumb.jpg

post-141731-0-13483200-1447027488_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/460898-gecko-coilovers-testing/
Share on other sites

Nah mate that's ok NSW is a bit of a drive from home.

All I would say is a couple things, actually make that three.

1. Having the damper set soft makes springs feel softer. It is not a good thing however as generally underdamped springs tend not to handle as well as they should.

2. Same, same for under inflated tyres.

3. Hillclimb speed is usually about confidence. It is common to go seconds faster as you build familiarity with the circuit.

Anyway good luck to you if you are happy with your car & suspension. Just not sure 13kg and comfortable belong in the same sentence. Your car would have left the factory with a spring rate 3kg/mm or less.

not recommending anything, just wanted to slap up a post,
damper settings are on 10 front 0 rear
I run 16inch mesh wheels on the street with 205/55 At 34 psi.
yes might have gain more
confidence but the car handles better(the king springs were rubbish)

kings springs as thats what the can came on

currently have stock sway bars looking to upgrade to superpro/whiteline bars

open to advise, here to learn.







FYI, when you make the front springs harder in increases the tendency to understeer. GTRs are worse than GTSTs due to the extra weight at the front due to the 4WD kit. If you find it understeers too much, reduce the front spring rate, then play with anti-roll bars. Similar to springs, you want to reduce the rate at the end where you need more grip, or increase the rate at the other end.

FWIW i've gone from 10/8 to 8/6 to 7/6. If i had your car the first thing i would do is put 10s in the front.

Hey all,

I have just upgraded my suspension from king springs and shocks,

To Gecko G-racing coilovers,(13kg front and 8kg rear)

still playing around with the dampaning setting but from the factory settings these are

Very comfortable for street use. I drive my daily 2 months on these coilovers

and I'm impressed with the comfort. I went to Huntley hill climb(Dapto NSW) and knocked 2.5 seconds off my time !!.

when to the last driving sports event and the car feels amazing, its a lot more predictable and easier to

control. all for $1250 I'm impressed. bought them via ozmotorsports (02) 42281250

Is it just me or does this sound like a massive sales pitch?

Spruiking a new product?

  • Like 1

FYI, when you make the front springs harder in increases the tendency to understeer. GTRs are worse than GTSTs due to the extra weight at the front due to the 4WD kit. If you find it understeers too much, reduce the front spring rate, then play with anti-roll bars. Similar to springs, you want to reduce the rate at the end where you need more grip, or increase the rate at the other end.

FWIW i've gone from 10/8 to 8/6 to 7/6. If i had your car the first thing i would do is put 10s in the front.

what sized sway bars would you recommend?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...