Jump to content
SAU Community

Recommended Posts

So what if you own one of these (-perhaps as a daily)?

State Gov't revenue might go down as much as half a million/day if we all bought them.

So...

1) Should you be able to use your mobile phone whilst the car's going?

2) If in an accident, do you blame the car?

3) Can you send the kids off in it after programming the car's destination?

4) Is traffic law conflict going to diminish?

5) Are HWP officers going to be relocated to other duties?

6) Warning sensors should alert owners to worn tyres, suspension damage, brake issues. So the onus is on the owner should a crash occur because of of fault codes right?

Link to comment
https://www.sau.com.au/forums/topic/460908-self-driving-cars/
Share on other sites

Have you seen this Ted talk Terry?

I'm not sure we'll need to worry at all about these things.

Original TED talk is here; https://www.ted.com/talks/chris_urmson_how_a_driverless_car_sees_the_road?language=en

  • Like 1

Thanks for that Christian...

Great tutorial - but many Qs answered quite yet.

7) Is onus going to be heavier on the manufacturer that sensors are operating perfectly if services are done on time?

8) Should this type of car be able to pick up pot holes so that damage to the suspension can be avoided?

In a fully autonomous situation, then the pedestrians were doing the wrong thing and should both die... slightly off topic but pedestrians need to understand that 100kg v 1500kg is a rigged fight.

​back on topic, this could never be a reality without heavy subsidy due to socio-economics

​The Tokyo Motor Show theme this year is Smart Mobility, and most of the concept cars were self-driving.

1) Yes and drink and party or sleep,

2) Manufacturer for sure

3) I'm no parent, but maybe if they had missile defence systems to avoid hijacking

4) Absolutely - so would see a rise in rego? or drop in road maintenance/advancements

5) Probably redundancy

6) Would definately require rigorous maintenance, ie. high cost.

Frankly, I wouldn't trust Volvo to get it too right.

I recall reading about their press release of a model feature auto emergency braking. One of the journos thought he would try it out; the car crashed into the car it was following!!!!!

But really, all this gadgetry is, I believe, half the problem now. Drivers are now believing themselves to be indestructable now that the car drives itself, brakes for itself, brakes don't lock, can't lose control in a swerve, etc.

Really, the only truly safe car is one with an attentive, skilled driver behind the wheel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Rear doors central locking wiring removed and cleaned. See the first 8sec video of when it’s filled with river silt. its a snip of what I’m up against. front and rear doors complete now. Maybe another day removing carpet and bits and pieces. Then the re assembly begins. 🤙 att.DqweJqhY5MZiZYQDVMhn3LtvdD1RBZ7TBG4f2s7W1zM.mp4 att.lFuN22MZEowqCbFAXoDw009r2gHL76ChMVfxMfBX-uk.mp4
    • There aren't boost creep issues, it's not engineered around the restriction of the cats but if you haven't tuned the engine a full decat + exhaust can flow enough air to run off the end of the OEM load scales and you will get a pretty substantial reduction in ignition timing as a result. I recommend using DFCO, avoiding ignition cut limiters, and avoiding popcorn tunes along with running a cat unless you enjoy a perpetually soot-covered and potentially burnt bumper.
    • Small update, it's been slow moving over the Christmas period with money having to go everywhere thats not my car 😅. I got myself a little present to myself from "santa" in the form of some tidy radiator mounts from fitmint automotive to get rid of the stock ones that look like they have been in an accident before and then straightened by a caveman. I know I should've replaced the rubber bush at the same time but I had no idea how bad they were until I was replacing the mounts. Decided to order their dash mat while I was at it as I feel like I am lucky enough to have a pretty decent condition dash and I don't want to risk it being ruined while it's parked in the aussie sun while I'm at work. I have found another electrical fault to add to the evergrowing list to eventually chase down. Every time I replace my taillight globe it blows within a day of use, I'm starting to think my life would be easier if I took a few minutes to learn how to use  a multimeter 😂.   Had some luck with finding a series 2 drivers headlight on marketplace to replace my mismatched series 1 headlight, a subtle difference but it's nice to have a matching set of lights now.   I returned to the air con problem due to being sick of this summer heat, found a good condition condenser to replace my leaking one! I got it in the car and was happy when I got the thumbs up that the system was now holding gas. Sadly the compressor is not kicking in for some reason, we even tried branching the relay in the fuse box. I have tried to do some research on the issue with no clear understanding of what the fix is, so for now it will be placed on the backburner until I can be bothered to look into the wiring to the compressor. The last small mods I have done was cutting the horizontal vents out of the front bar, not really in a functional airflow sense but I just think it looks better as I am not a fan of the series 2 bar. I also switched the shift knob out for a hosoboyo aluminium grex style one, it has a really nice more direct driving feel than the outdated rubbery oem one. Thirdly, I chucked on one of the ebay bonnet strut kits. The fitment is decent and they seem to work fairly well. They have only given out once while the car was parked facing downhill, I think if I was working under the bonnet I would still put the oem hood stay up to be precautionary as to avoid getting a speedy concussion.
    • Got pneumonia, haven’t played with her in a while, but I’m back now. Previous owners cut bonnet pins into the bonnet. My choice try find a replacement or spend $15 get some pins myself to cover up. Now only one small hole to cover. looks shit now, but when the bonnet is red again. Be good 🤞
    • No R32 GTSt had 15" wheels. 205/55-16 was standard GTSt fare. 4.36:1 is standard R32 turbo auto diff. I think the manual was too, not 4.11. 4.11 and 4.08 were R33 namual and auto respectively.
×
×
  • Create New...