Braided Clutch Line Install Issues!

[DanEdser]

So I recently bought GKTech's braided clutch line for my r33 gts25t, installed it today, bled it from the slave cylinder properly using a vacuum bleeding kit, made sure there are no air bubbles, and now the clutch just goes straight to the floor!

Anyone had this issue?? What is the fix??

[admS15]

Keep bleeding it

[DanEdser]

I've bled it lots! almost gone through a whole bottle of brake fluid!

Theres no air bubbles coming out of the bleed nipple D:

[admS15]

Does it still have the damper? If so you will need to bleed that too. There should be another nipple.

[DanEdser]

Nope the GKTech kit replaced the damper, goes straight from the master cylinder to slave cylinder

I'm thinking the fluid isnt entering the slave cylinder properly, as it bleeds from the bleed nipple with no air or anything, but doesn't seem to push the slave what-so-ever

[Sick_R31]

Did you bleed the master cylinder after bleeding the slave cylinder?

[DanEdser]

I have not bled the master cylinder?

I'm also struggling on finding any how-to's online on bleeding a master cylinder

[GTSBoy]

I'm also struggling on finding any how-to's online on bleeding a master cylinder

Crack the outlet nipple on the master and push the pedal.

[DanEdser]

It was that easy! Thanks guys!

Other clutches ive done havent had a nipple on master cylinder reservoir! Didnt even realise it was there.

[kingtube69]

Had the same problem when I bled mine months and months ago. Cracked the master nipple and bled it and it was good again.

[dyl33]

If I've replaced the clutch line should I bleed the slave first and then the master or the master first then to slave?

Im thinking slave first to fill the system with fluid and then release any air in the master?

[GTSBoy]

Always bleed a master before trying to bleed the line. That's the point of having a bleeder on a master.

Having said that, you will inevitably end up going back and forth between them trying to get a pedal anyway. So it probably doesn't matter.

[dyl33]

Ok thank you.