Jump to content
SAU Community

Recommended Posts

All parts in Sydney, off my 02 R34 GTR.

ASNU 1200cc injectors (at 4bar), done less than 3,000kms, look them up, these are the best you can get, stainless injectors, E85 safe, fits stock rail, flow matched, no smoke, genuine big injector, not flowed like others, a dream to tune - $700

NTK O2 sensors (for 33 and 34) - $80

Stock Airbox and Air Intake (snorkel) - $250

Stock Twin Turbo Pipe - $18

Stock AFM's - $100

Stock intercooler - $150

Stock intercooler and intake pipework - $80

Stock Front Pipe - $50

Stock Cams - $100

Stock Cam Gears - $50

Stock Washer Bottle - $20

Stock Fuel Rail - $50

Stock 2001 model struts and springs - $200

Samco blue silicone radiator hoses (top one used) - $30

Apexi 3.5" Rear Muffler, tapers inside a little, still pretty quiet down low, flanged, R34 GTR hangers - $150

Apexi 3" mid muffler with some flanges and pipework - $100

Autobahn88 100mm GTR intercooler (supported 430kw, one small dent) - $200

Tomei Z32 plugs - $20

Precision or non-bb turbo oil drain fitting - $25

post-66475-0-79892300-1448244750_thumb.jpg

post-66475-0-52622300-1448244751_thumb.jpg

post-66475-0-46343400-1448244752_thumb.jpg

post-66475-0-74994900-1448244752_thumb.jpg

post-66475-0-16443900-1448244753_thumb.jpg

post-66475-0-44668500-1448244753_thumb.jpg

post-66475-0-65550800-1448244753_thumb.jpg

post-66475-0-91152700-1448244753_thumb.jpg

post-66475-0-48208500-1448244754_thumb.jpg

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...