Jump to content
SAU Community

Recommended Posts

Hi all

Long time no boost.

Time to feel the rush again. this time not just a stock rb25det with intercooler.

I have an apparent F6 Turbo im puttin on my forged RB30 today, i think its BB but not 100% sure & i want your advise.

Features:

6 bolts either side
spins around 13 seconds after blasted with air gun
looks like restrictor in top oil feed but its 3-4mm

pics attached

BTW what do you think of a 5" dump pipe i made for this performance wise ?

Cheers

post-46085-0-48991200-1448403507_thumb.jpg

post-46085-0-57823000-1448403521_thumb.jpg

post-46085-0-47351700-1448403536_thumb.jpg

post-46085-0-08742300-1448403560_thumb.jpg

Ball bearing turbo's don't need a lot of oil flow, and the GT35 likes to burn a little oil if the feed is opened up from my experience. I would start with a 1mm restricted AN fitting for the feed and see how it goes.

A filter in the feed line is a good idea, not a little pissy one, a larger stainless mesh filter to take out any crap that may block the 1mm hole.

Pretty sure the F6 still ran a 3 inch inlet, so this would be an aftermarket GT35, do you have some pics of the dump flange side?

Yep, Falcon GT35 didn't have a large inlet but they did have that smaller A/R. Maybe it changed at some point?

Unless you change the front A/R and aiming for 380rwkw, bit of a poor turbo choice IMO.

Better off with a GT30 with a 1.06 AR if 300rwkw-330rwkw is the goal, even a .82 works well, comes on early and hard though so you need a decent investment in tyres/diff/suspension

  • Like 1

Cheers guys i called up honeywell & gcg, they said max oil pressure of 45 psi to the turbo for this one, it has a restrictor built in around the corner from oil feed but still needs 1mm restrictor pre turbo so i bought one thursday arvo.

Yeah i was thinking of getting an inline oil filter as enzed didnt stock any when i got the restrictor. so i will order one online thanks.

This turbo came on a spag manifold with a plated vl turbo with lots of mods, forged, int, fullspool, 31 spline billet axles etc etc. and LOTS of spares all for 2.5k.
i just had to make it work IE make dump/ lines/ spacer etc it gets rego this week.

This turbo is better then no turbo so i slapped it on i know its a fair upgrade from a stock rb30 turbo that pumps a pissant 150 kw, this one pumps 310kw so im expecting laggg etc. I dont know heaps about them but ill test it. then change it if i dont like it, next is comp & tune.

what turbo would you suggest for rb30 300 kw give or take ?

what sort of power can these boost to safely 400kw ? more i guess

Turbo exit pic attached

post-46085-0-60406900-1448776520_thumb.jpg

With the current turbocharger you have. Run it with a .82 rear housing, should see pretty responsive 360rwkws mark. The next size up would be a GTX3582, or just fit a GTX3582 wheel to your current CHRA.

what turbo would you suggest for rb30 300 kw give or take ?

what sort of power can these boost to safely 400kw ? more i guess

GT30 as I said above for 300-330.

You can get 400rwkw on E85 with the current turbo you have. The XR6 GT35s always seem to be a tad shorter on the power, probably the compressor A/R at the upper end making a slight difference. Overall compressor A/R doesn't make that much difference, turbine far more important.

If you are going E85, get a GTX series. If you are staying on PULP then the GT series are the better choice IMO. GTXs only really shine at the higher boost ranges (talking 20psi++)

Really depends what the use will be, it's too large for the street if you want response, but as a track turbo it would work well imo.

I much prefer a smaller turbo and leaning on it harder (for the street) but a 3L should spool the GT35 up nicely anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...