Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

Consumer (NZ) just tested HD dash cams. Prices ranged from $109 to $695 but none was considered good quality. It was not possible to read a number plate at more than 5 metres and less than that only if relative speeds of the cars were much the same.

Best of these was DOD LS460W ($250 - $300)

PS there are apparently some apps for your smart phone that wills do the job assuming you can get a suitable forward facing holder.

Link to comment
https://www.sau.com.au/forums/topic/461330-dash-cams/#findComment-7658752
Share on other sites

Brother has the Navman one for $130, does a decent job. I bought the model up for about $170 because the cheaper one wasn't available -Its got a few nicer features but nothing worth writing home about.

Haven't had any problems with either of them

Link to comment
https://www.sau.com.au/forums/topic/461330-dash-cams/#findComment-7659048
Share on other sites

I recently bought the kaiser baas r10+ on sale at super shit auto ATM for $98. 1080p records fairly decent picture quality. Considering all these cams are made in China or best case Korea, its hard to know what your getting. I think its a good idea to buy from a shop that u can return to, just in case. My 2c.

Link to comment
https://www.sau.com.au/forums/topic/461330-dash-cams/#findComment-7659107
Share on other sites

I have a cheap ebay dash cam. Cost $40, and another $25 for a 32gb card. Does the job, records in 720, and will probably do if anything bad ever happens. Just be sure to hard wire it in to keep the ciggy lighter socket for anything else.

Small update, the eBay cheapie appears to have died from this awful Adelaide heat...

Link to comment
https://www.sau.com.au/forums/topic/461330-dash-cams/#findComment-7659939
Share on other sites

Consumer (NZ) just tested HD dash cams. Prices ranged from $109 to $695 but none was considered good quality. It was not possible to read a number plate at more than 5 metres and less than that only if relative speeds of the cars were much the same.

Best of these was DOD LS460W ($250 - $300)

PS there are apparently some apps for your smart phone that wills do the job assuming you can get a suitable forward facing holder.

I had a close call yesterday where a motorcyclist cut in front of me without indicating and then had to emergency brake due to other cars ahead. I knew I couldn't stop in time so I swerved around the bike and missed it by only centimetres. It was oh so close. Bike rider deserved to be hit but that's another story.

When i got home and reviewed the footage on my PC I was able to make out the no. plates on the bike and of all the vehicles in my line of sight from the footage prior to and up to the point of the incident by pausing the footage frame by frame.

So although it is true that you can't clearly make out plates from more than 5 metres, there is a place for these cams and they can be very useful. On this occasion if I had hit the bike rider, the footage was clear enough to be used as evidence and would have clearly shown exactly what had happened and that I was cruising along minding my own business when some f#*kwit decided to just jump in front of me and get cleaned up.

Link to comment
https://www.sau.com.au/forums/topic/461330-dash-cams/#findComment-7659947
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Given you already have the engine cross member to match and likely gearbox mount to. The SR20 has a head start on the RB in this case. They handle GREAT with an SR20, lots of fun.   One I did back in the day
    • have no doubt and wanted too trust me and may regret later not necessarily worried about weight (would be 8 kg ish total) it was more the $$ to do it properly is about $6 - $7K in hardwear need long 310mm stroke jacks etc - plus install and call me whatever im not doing it myself even if wanted too cant weld etc  - thats $10K installed vs fraction of that cost while Ive spent some money on this POS I actually really dont like doing so unless its got a large chance to make me go faster 😁 hey in still carting this things around on a 15 yr old rusted open trailer so I can spend on racing not buy a new trailer to look better the manual jacks Ive had done are heavy and take space but are transportable and usable anywhere - taking or organizing even compressed air let alone nitrogen which is more whats needed coming from Perth to Winton or Sydney or the like honestly just adds to my brain headaches/ hurts of organisation also ha 15 mins job will get down to 2 - 5 min job vs 1 min job for airjacks - all tradeoffs I spose
    • Purely out of curiosity, how do you know all this @dbm7? Do you work with automatic gearboxes professionally? This goes way way way beyond "I've had an automatic Skyline once and did some mucking around"
    • I'll just reiterate that it's best to do all the wiring diagnostics, before even thinking about buying replacement solenoids ~ that is, be absolutely sure the solenoid is bad.....ie; bad connector(s), rodents chewed through a wire, etc etc. If you don't so this, you can fork out all the money for solenoids, only to find something else is wrong (this'll make you cry if you pull the valvebody only to find a broken wire is at fault... ...some more glue on the solenoid packs -- this is the RE5R01A shift solenoid assembly.... ...these are all shift solenoids ~ ostensibly they're the same as the shift solenoids from the 4-speed auto.... ...this is the RE4R01A solenoid set... ...with these, you have 3 shift solenoids attached to the plate, and the separate solenoid is the EPC solenoid (line pressure control) -- with both designs, the TC lockup clutch solenoid (also PWM so they could slide the clutch shut), is located on the lower valvebody half.... ...(story time)...back in the 90's, it was a common fault that the EPC solenoid (or TC-lock solenoid) would fail, but Nissan only sold them as part of the assembly (think ~$350 at the time) ~ thing was, Isuzu also used these boxes in light commercials, and you could buy the PWM solenoid as a separate part, so it was possible to buy/use that solenoid (around $65), and make it fit (remove the circlip, fit to old plate and deal with wiring)...making it a more cost effective repair. I've not seen the RE5R01A shift solenoid assembly, but with the 4-speed RE4R01A it was possible to hack/fit a single shift solenoid onto an other working set, using a donor solenoid from another set with failed EPC....(by rights the whole set should be replaced), but it ends up being a question of how much life is left in the box itself ; sometimes it's a viable repair to fix one solenoid, just to get another 100k of road miles out of it before it needs first overhaul...other times the box is that old/worn, you're as well doing first overhaul and replacing the solenoids and starting fresh... What Nissan did here with the 5-speed, was relocate the EPC solenoid to the lower valvebody (next to the TC lockup solenoid), and stuck the direct-drive clutch solenoid (for the extra gear) where the EPC solenoid used to be on the 4-speed....I can only imagine they did this for serviceability ; the PWM solenoids are most likely to fail, and it's a doddle to drop the pan and change these out (as opposed to dropping the valvebody itself to get at a top mounted EPC)... ...also keep in mind, that some BMW 3/5 series & Mazda (and maybe some Ford/Mazda rebadges, not sure), also used the RE5R01A box under a different name/part number...not saying parts availability is any better, but sometimes it helps to know this when it comes to NOS floating about in the EU.... HTH  
    • FWIW, air jacks are actually pretty light and simple to add, they are just 4 hydraulic cylinders (often at the main cage A and C pillar points) and an externally accessible airline  - they make quick work a breeze
×
×
  • Create New...