Jump to content
SAU Community

Recommended Posts

For sale

R32 GTR factory air box and snorkel with K&N filter $100

R32 GTR engine fan $50

R32 GTR bonnet latch support $50

R32 GTR bonnet latch mechanism assy $50

R32 stereo surround $60 black smooth

R32 ash tray black smooth $20

R32 manual surround and boot smooth black $40

Or $100 all three

R32 twin core alloy radiator. 70mm end tanks, 58mm core comes with silicone hoses and mounts $120 (clears engine fan)

Rb26 twin turbo pipes and hose, polished excellent condition $80

OS Giken adjustable cam gears $200

Genuine drivers Recaro sr3 reclinable bucket seat on genuine bride rail $350 (has tear)

R32 GTR battery clamp $40

R32 passenger vent in mint condition $50

R32 drivers window switch assy $50

R32 gtr lower cluster surround, with clock (not working) $50

R32 GTR boot trim $100 with board carpet and all side pieces good condition no tears

R32 GTR centre gauges $40

R32 GTR a/c climate control module $50

R32 GTR ecu $70

R32/R33 GTR front drive shafts $100ea both available. Great cv's and boots

R32 GTR G senser good condition still white indicator $100

R32 heater vent servo motor $50ea both passenger and drivers side available

R32 GTR dash with mint demister vent. Slightest bubble near passenger vent. $50

R32 GTR kick panels $20ea side

R32 passenger window switch $30

R32 genuine Nissan floor mats great condition rubber underneath not cracked at all $40 (3 piece rear only)

Located Gold Coast can freight worldwide

0414596256

Text for more photos as I've maxed out what I can upload

post-44496-14492249916375_thumb.jpg

post-44496-14492247773154_thumb.jpg

post-44496-14492245969763_thumb.jpg

post-44496-14492242902622_thumb.jpgpost-44496-14492243087582_thumb.jpg

post-44496-14492246481889_thumb.jpg

post-44496-14492247128185_thumb.jpg

post-44496-14492249657166_thumb.jpg

post-44496-14492250498577_thumb.jpg

post-44496-14492250872008_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/461471-r32-gtr-part-out/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • f**kin' yikes! That insulation is the shittest stuff I have ever seen. You need to do an insurance job on that f**ker, pronto. WRT to the washer cover, I would have said that there'd have to be some at a wrecker, then remembered that it's a BMW, and reasoned that every single wrecked one would have been tailgating and so the front end would be trashed.
    • Oh and I lost my headlight washer jet cover!
    • Ok, so I got myself some X1 wheels really cheap to try out, they're a bit different and I like them but they're really narrow (18x8) they are available in staggered 18x8/9 also but really hard to find.  I kinda dig them, but not as much as the F10 19's I usually run, so these go into the wheel pile.         As I mentioned in another thread, I got a new exhaust. It's an off-the-shelf stainless one that fits OH-KAY. I don't love the tips size and how far they come out the back, I think I might cut the tips off and replace with some smaller (~3") ones that don't extend as far. It sounds really good though, I'm not sure if its just in my head but the car feels a little quicker, more responsive.      I fitted an eBay special front lip. Surprisingly it fit perfectly and all holes lined up. Its a little rickety but I haven't put any double sided tape on yet, I want to clean the front bar up where it has scraped the road a lot and fil in the number plate holes (or, get body coloured wrap to cover them - is this a thing?  I'm not sure if I'll leave it gloss or pain it matte. I really like it though, I don't particularly like the front bar without it, I don't really like the M-Sport and to get anything else is just too expensive. That said, I might need a new one now anyway as I dropped the car onto the jack after forgetting to put ramps under the front wheels. It bent a lot and while it did go back to normal after I got the car off the jack, I do fear I have not done it any favours.    Lastly, my headlights died. Different problems in each. They have gotten much dimmer over the past year or so, I put new (uber expensive) OSRAM bulbs in them but to no avail. One of them pointed at the ground and the other just kinda did its own thing with light working sometimes. Yeah, check this 18 year old BMW headlight wire. I reckon I know why they were stuffed.            BTW, the yellow and black is the power to the Xenons. Yikes. I hunted around an researched my options here. I would have loved to just get a replacement harness but not a thing. My car has adaptive headlights, that is they rotate left and right with the steering wheel. Good condition used adaptive xenons were over $700 each, non adaptive were around $400 each, but I couldn't help but think that they're all around 18 years old now, surely they'd have the same problems. So I looked at newer LCI headlights but they were even more expensive and I couldn't confirm that they'd be plug and play with lots of people having lots of opinions so not worth the risk.  I ended up getting brand new Chinese headlights from MARS. They're very close to OEM with only the angel eyes being a bit different. I didnt want crazy turn signals or sharp DRL's or anything. Not my bag.  They're not adaptive, I thought thats a feature I wouldn't really miss. So I coded that out.  The lights are awesome, they look so nice and they take so many years off the car. The angel eyes look great and the headlight brightness is ridiculous. I was so used to the old ones, I didn't realise just how bad they were. The new ones use the OEM bulbs, Xenon ballast and leveller motor which I was happier with. The only issue with them is that the rear cover is held on by SEVEN screws. This will be a nightmare to get to and open when I need to change bulbs.   
    • Now that you mention it I can see those too. More subtle. The lighting and low resolution makes it hard to assess super well what's going on but what is visible is bad enough to pull the motor.
    • I feel like this is due an update
×
×
  • Create New...