Jump to content
SAU Community

Gopro Hero 4 Black - Issues.

CaptainFresh

By CaptainFresh,
in Photography

 Share

Recommended Posts

CaptainFresh Enthusiast

CaptainFresh

Posted
Posted (edited)

Well, Hello anyone who reads this.

Ok, i bought a Gopro hero 4 black edition, the memory card i have does not work apparently But that is not the problem... The problem is ( see attached photo )

This is the Preview screen. I like the Quality of the camera, Dont you?

Now, the memory card I tried is the one out of my hero 3 black, which worked fine. Apparently its old tech, so doesnt work properly with the new ones..

But when i did get it to work Briefly. In a 1 minute video, It appeared like the photo for atleast 20 seconds of it.

Now i am hoping this is just a memory card issue BUT that is what the Preview looks like the whole time.

I've read that some people have had this issue, and it looks fine when you watch a recording.


My Computer is more then up to the task of watching it and as you can see this was with the go pro app on my phone.

I will buy a new memory card tomorrow, and hopefully that solves my issue. if not im Screwed as i bought this From someone off gumtree "Brand new in sealed box" which it was but i Dont have a Reciept or any clue of when it was bought etc. so warranty could be an issue.


Basically does anyone else have experience in this problem? or any suggestions?

post-134861-0-46915300-1449812410_thumb.jpg

Edited by CaptainFresh
Link to comment
https://www.sau.com.au/forums/topic/461598-gopro-hero-4-black-issues/
Share on other sites
CaptainFresh Enthusiast

CaptainFresh

Posted
  • Author
Posted

The memory card I tried using was the one from my hero 3. I'm hoping it's just the memory card being old and not up to the task.

The photo attached was actually without a memory card in, this is the Preview screen on the GoPro phone app.

Apparently some people have the same issue but when they record it turns out perfect. So hopefully this post turns out to be pointless and I'm just a noob who should have bought a memory card at the same time.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Murray_Calavera · Posted

      Reading your posts Josh, sometimes I feel like I've gone in a time machine back to the 90's when everyone was doe-eyed and figuring things out for the first time.  I've lost track of how many single turbo GTR's I've seen on track that haven't burnt down lol. Everything has been figured out a long time ago. These things are at the point now where its essentially turn-key to go single turbo. 
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      Among other things yes. Making sure to either use an oil pressure regulator or the right restrictor size for your oil pump/range of oil viscosities you intend to run, making sure you plumb the lines correctly, turbo should be placed such that it siphons properly even when the water pump isn't turning so you don't boil coolant in the turbo after shutdown, oil return should be low resistance and also preferably picking the one that is most likely to return to the pickup as opposed to some other irrelevant part of the pan. It's far from impossible to figure this out but I have seen people really, really struggle and if that's the case it's easier to just take the path of least resistance. To me, bolt-on twin turbos are a fixed cost whereas single turbo is almost unbounded.
    • Looney_Head
      R32 GTS-t RB30 sedan

      By Looney_Head · Posted

      Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • GTSBoy
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By GTSBoy · Posted

      Ceramic coating and heat shielding, you mean?
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
×
×
  • Create New...