Jump to content
SAU Community

Recommended Posts

Am probably going to end up with a need for a new exhaust on my old GTR. The usual wish list of stainless, quiet with little power loss applies. The following HKS system looked pretty good (I don't want a drone cannon)

http://www.hks-power.co.jp/en/product/exhaust/muffler/stm/index.html

Anyway the point is the system runs to $1000 plus $470 worth of air freight pricing from RHD Japan and I suspect with the application of Straya tax it would be more again if I sourced it locally.

The question is: Is there a better/cheaper exhaust option or a better shipping option that anyone has used recently?

Please note I live in WA so freight ex the eastern states can hurt a bit too. Not trying to be a tight arse just cant fathom the logic of spending so much on air freight for something that isn't urgent and never had any success in using sea freight.

'Twere me I would source the muffler they use on that system from them (if I really wanted that muffler) and a centre-offset or centre-centre (like the one in the HKS system) mid muffler locally and get a local shop to make the rest up. Then you only pay shipping for the bit that really matters.

I had to replace the mid muffler on my (Jap) system a few years ago. Can't remember which one I got exactly, but there is certainly more than one option available locally that will do the job perfectly well. The rest of it is just pipe and hangers.

Mostly because I live in the country and the options for non muppet related exhaust shops are pretty limited and competence tends to run out at 3".

Can anyone recommend brand names - cause it is all about the brand name, mostly JASMA. But seriously that would help.

  • Like 1

Why not source some universal mufflers and get a system made by a local guy?

This is what I would do. Cost you maybe $200-$300ea for mufflers x2 of solid quality, be super quiet because of it as well.

It'll end up costing around $$120-$1500 depending on CAT needed or not.

JASMA isn't a brand name, it's just a noise certification. Problem is Jap systems that are like 3.5" and JASMA, usually have a nasty 2.5" restrictor (midway through) or similar step-down somewhere along the line totally negating the point of going bigger in a Jap branded/quiet exhaust.

I've never had a problem sea freight using Import Monster for 8 years or so now. When you pack and unpack your own container, you can ensure it's not stuffed.

JASMA isn't a brand name, it's just a noise certification. Problem is Jap systems that are like 3.5" and JASMA, usually have a nasty 2.5" restrictor (midway through) or similar step-down somewhere along the line totally negating the point of going bigger in a Jap branded/quiet exhaust.

I've never had a problem sea freight using Import Monster for 8 years or so now. When you pack and unpack your own container, you can ensure it's not stuffed.

Yeah I know - the Jasma thing was a feeble joke.

Car has an APEXI on it but no chance of getting that again, obviously.

It's a good system.

Cost me about $1280 delivered. RHD.

The difference now would be the AUD V Yen.

I didn't get in customs charge.

HKS Australia will charge the same.

is it a true 90mm diameter system or does it have the usual shitty stepdowns ?

I have an old Nismo catback thats a touch bigger than 3" for a couple hundred bucks.

Either use as is or chop up for its good mufflers.

Welcome to inspect next time you're up near Barbs (I'm in Warwick)

is it a true 90mm diameter system or does it have the usual shitty stepdowns ?

Its 85mm all the way but reduced to 80mm at the connection to the Cat exit.

Have one on my 33.

Does not seem to be restrictive and no drone.

Quiet below 3k above its a nice sound, not to offensive to the public. :-)

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
    • Remember reading about this not too long ago. been for sale for a long time  this is like when the wife says you need to sell the car so you put it up for a ridiculous price no one will pay
    • You are perhaps suggesting that it is not a super car? Well....it's not an AU.
    • Dropped the MX5 of this morning to get the hardtop colour matched and some PDR done, they are also going to give it a buff to remove some "stubborn" swirl marks and light scratches in the clear coat Over the last few months the poor little thing has copped some shopping centre car park abuse, I try to not park in them, but hitting Westfield's a few times over the last few months has taken its toll, nothing really bad, but enough of a trigger for a "while we're in there" thingie  Once it's back and all the one colour, with a few dents and mark's removed I'll give some of these products a go and see what they're like  
×
×
  • Create New...