Jump to content
SAU Community

Rb25det Kicks But Won't Run.

Pauly The R33

By Pauly The R33,
in Engines & Forced Induction

 Share

Recommended Posts

Pauly The R33 Contributor

Pauly The R33

Posted
  • Author
Posted

Yeah I thought that to be a logical step to replace it and bang it would fire up but not the case , leading me to an ecu or timing remedy . I'll put the safc back in and see how it goes.

Basically replacing all parts for new for reliability and fault finding purposes .

Pauly The R33 Contributor

Pauly The R33

Posted
  • Author
Posted

Wired Safc back in same issue noticed my rpm wasn't showing up and getting issue with tacho on dash, will clean up the plug and dash and replace the tps sensor for good measure . Also going to replace the 02 sensor & sourcing my self an ecutalk consult cable.

Going to Wire up my adaptronic ecu and set it up and the fault find continues.

Also might replace the Alarm system as it was installed previously and i just don't trust it.

Pauly The R33 Contributor

Pauly The R33

Posted
  • Author
Posted

so you replaced the fuel hoses and coolant lines and it wont fire? check lines, can you remember if you put the fuel pump fuse back in?

Yeah trex ive check all of these and put it all back together as per the nissan manual. Fuel pump runs as per the above comments

Pauly The R33 Contributor

Pauly The R33

Posted
  • Author
Posted

Progress !! Noticed the afrs on the safc were rich AF then low as . Fitted my sard fpr and set it to 43psi to get me 12:1 ish and its running ! need to fix up and idle issue its only idling at 400rpm and will stall after boost. Going to inspect my standard fpr but being 20yrs old its had a good life.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • alburger87
      HY51 Fuga Hybrid

      By alburger87 · Posted

      True, might get it looked at. Found out you can in fact flatten the 12v battery relatively easily too the other day (kids lefts the hazards on) so meaning to get that checked in the new year. What's odd is it'll blow cold from both vents if you have the ac down as low as poss (18), but anything else the passenger one blows warmish. Also has been summer since I got it obvs but noticed it didn't seem to want to blow hot last night when we had a cold snap. 
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      You ask for things. You specifically state you want responsiveness. A link was provided for a far superior, more responsive option. Find a MX5 workshop that will install it for you. Maybe MX5 Mania will throw on the Fab9 kit. It seems they want to charge almost 14K installed for their kit, so if they charge you $6K to install the FAB9 kit then you'll be ahead? Though really, the 2.5 with a 2860 running low boost will more or less feel as good as anything else. It's a lot of displacement and a small turbo. Think of a more modern RB26 with one stock turbo :p TBH, truth be told I've been driving my own car, and use about 50% throttle at most for 99.9% of the time. Mr Bogan is likely similar so this is all going to be semantics for the use case he actually has. (He'll be happy with anything relative to now) However, the EFR is hands down far superior in this use case. You really, really, really, really do notice it over the Garrett or equivalent.  
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      You are correct, the earlier the torque, the earlier things snap
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Gents, it will be getting the MX5 Mania kit and the 2.5 will be staying where it is My query was about the 0.64 or the 0.86, whilst the 0.64 might spool a bit faster, would the 0.86 be better IRT EGT and mechanical sympathy, with only a small difference in spool And as I assume I won't need alot of boost to get to 200kw, probably around 10 psi, and with max rpm at 6500, would high EGT even really be a issue with a 0.64 I'm heading into MX5 Mania at the end of Jan to discuss the install, so any info is welcome prior to that Basically have a chat and book a time so they can throw on the turbo kit, and fit a oil cooler with a thermostat, drive in drive out of course  In other news: just finished cleaning the car inside and out, it's now all ready to get covered in bugs and dirt driving to Goulburn tomorrow to lunch,  and go for a stroll along woolondilly River with the daughter and her boy, and of course, visit my grandcats and my new grandpuppy 
    • GTSBoy
      HY51 Fuga Hybrid

      By GTSBoy · Posted

      Sounds like it has an actual problem with mode select doors, or something.
×
×
  • Create New...