Jump to content
SAU Community

Recommended Posts

Hi guys, I seem to have a bit of a bump after letting off the accelerator in my 96 R33 GTST. I originally thought it was diff backlash so I've swapped the diff but it hasn't made any difference. I'm all out of ideas as to what it could be. Any suggestions?

Link to comment
https://www.sau.com.au/forums/topic/461915-bump-after-letting-off-accelerator/
Share on other sites

As soon as I get the chance I'll have a look. Was hoping it might be an easy fix :(

It wouldn't have anything to do with hicas at all would it? I wouldn't have thought it would caused this but I've heard of some people hearing a knock from the rear of their car with the Hicas unit still in.

It will be the mounts for the rest cradle

+1 for broken subframe mounts.

Any pics of the area you mean? I have the same sound and I'd like to know where to look. Do you mean the parts that bolt the subframe to the car (i.e where you would put the subframe collars?)

Any pics of the area you mean? I have the same sound and I'd like to know where to look. Do you mean the parts that bolt the subframe to the car (i.e where you would put the subframe collars?)

Thanks guys, agreed that any pics of what I should be checking would be extremely helpful if possible. Just want to make sure I'm not looking for the wrong thing

  • 2 weeks later...

Still haven't had a chance to get it up on stands to have a look around underneath. Will hopefully get a chance this weekend and I'll look over the CV's.

If they do knock is there a fix for them or will they have to be replaced altogether?

  • 1 month later...

I've had the car up on stands and had a good look around. Cv's and subframe bolts all seem tight and solid. I'm now leaning towards this possibly being the tail shaft bearing as there's also a rattle/vibration I can hear at low revs or when under load going up a hill.

Does that sound plausible and would there be any way to go about checking it?

  • 4 months later...

I've had the car up on stands and had a good look around. Cv's and subframe bolts all seem tight and solid. I'm now leaning towards this possibly being the tail shaft bearing as there's also a rattle/vibration I can hear at low revs or when under load going up a hill.

Does that sound plausible and would there be any way to go about checking it?

Hey Brad, Did you end up fixing this issue? I'm having the same problem

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've owned a few scooters over the years, a Vespa PX oil burner was my first scooter, followed by a few others, including a little 50cc BeeWee that I used as a barracks bike, and I've had a blast on all of them, they really are the cheapest for of city/suburb transport around The only issue with scooters in Australia is lots of people look down on them due to their size,  maybe they need a big bike to make up for something else where they are lacking, unlike Europe and Asia where every man an their dog owns one, and now that filtering is legal in NSW, local traffic is never a issue Not to say I haven't owned my share of big cc bikes over the years, but they were for more blasting through the hills or Hwy riding where it needed to sit on Hwy speeds Safety wise, I ride like everyone is always trying to kill me, everyone is running a red, or running stop/give way signs, or generally asleep at the wheel, which most people are duringtheir commute, I also ride really safe, and give myself, and everyone else enough room in case I need to pull some hasty evasive actions, I've done a few rider training days over the years, which has come in handy on more than a few occasions  As for mods, there's nothing really, and yes your right about aftermarket exhaust, all you get is loud and obnoxious noises from them, like every 250-300 cc you hear with a aftermarket muffler, in saying this I did put a rear muffler from a 125 Aprilla on one of my old 125 scooters, it was horrendous and no amount of full face helmet and ear plugs would dampen that noise As for coming from the Harley, and what a overpriced POS that was, I no longer do big rides as my poor old busted joints ache after about 1/2 an hour of riding, long cruises are so much more enjoyable now in a car, so a big bike would be pointless   
    • Oh wow, it's easy to forget how cheap these can be. Probably the cheapest way to travel. Though people in cars here tend to be morons and I would not feel very safe. Were scooters ever big in Australia? It used to be the thing growing up in Europe ~20 years ago. 50/70/125ccm Peugeot or Yamaha and some others. Utterly obnoxious Polini race exhausts. Kick stands that slant as much as possible. So loud. So much noise for really not moving very fast at all. But it felt cool at the time. Not sure where I'm going with this, but there is an aftermarket for mopeds! Though I'd have pictured you more for a Goldwing kind of guy after growing out of the Harley.
    • You need to know I am sorry for this.  
    • As the MX5 isn't apparently "manly" enough, and I need something for runs to the local shops, and also take to my part time job at the salon, basically I can keep the MX5 away from car parks and stuff......like "flying lockers", I was wondering what I could buy to fix this issue LOL, I pick up a new Yamaha 125 Delight this arvo from Trooper Lu, basically a R1 that you can fit a slab of beer on between your feet, also, it was $29400 cheaper than a R1, so actually it's 2 x better than a R1    
    • Nah. H2S. H2S is "rotten egg gas", which is what is associated with no cat. SO2 is equally nasty, and if you've ever smelt it you'll know all about it. More of a choking, acid in the back of the throat sort of thing. But you can only smell it in a narrow range up to about 1ppm. Above that, it irritates your mucous membranes, but you don't smell it.
×
×
  • Create New...