Jump to content
SAU Community

Recommended Posts

Unfortunately nothing yet. I've replaced the tailshaft in mine which made absolutely no difference. I've also replaced the diff to rule out diff backlash but that hasn't changed anything either :(

I bought a nismo gearbox mount the other week which I plan to swap in shortly. Honestly if that doesn't solve it I'm a bit stumped as to what else it could be.

Had it in only a fortnight ago to have the inner tie rods and rack ends replaced. CV's seem fine to me and I'm sure they would have said something if they were busted. They even replaced the cv boots for me cos they were a little worn

  • 3 months later...

I have been having a similar issue for alittle while, sent the car to a garage for afew issues and asked them to look it over, was told the bushes where worn but not completely gone and that that was most likely the problem and getting them to replace them for me was a smart idea... I decided against it because the car is very rarely driven and it could wait..  Once I put the car on the hoist myself for a look it became quite apparent... Of the 5 drivers side driveshaft bolts 1 was missing and the rest were finger tight... 

For good measure I installed a HICAS delete kit and some subframe collars to lock the standard bushes untill i plan on pulling the rear subframe.. But the loose shaft was most likely 99% of the problem

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
×
×
  • Create New...