Jump to content
SAU Community

Recommended Posts

Qld Raceway Sprint Track - 59.30 sec

Qld Racway Clubman Track - 1:02.25 sec

Qd Raceway National Track - 1:25.61 sec

Can anyoen clarify the number of circuit formats you guys use up there...it seems i have made a mess of the times as i didnt realise there was 3?!?!?! Is there more?

This was from a *very* long time ago:

SAU Nickname: 46n2

Car Make and Model: R32 GTST

Circuit Name: Qld Raceway, sprint circuit

Lap time: 1:07.78

Modifications

Engine:RB20DET

Power: dyno'd at ~110rwkw a few months before before hitting the track

Suspension: HKS non Adjustable coilovers, Front Hollow Swaybar

Other Mods: None - stock right down to the exhaust :D

Tyres: Ventus (cheapo rubber that came with rims) - useless with no grip

Brakes: RB74 Front, rear standard, rotors standard

First time with new setup

SAU Nickname: Stealth

Car Make and Model: R33 SII GTST

Circuit Name: Qld Raceway, sprint circuit

Lap time: 1:00.95

Modifications

Engine:RB25DET

Power: dyno'd at 347hp atw

Suspension: Tein Adjustable coilovers, Nismo Swaybar

Other Mods: Race pipe, GT35/40 int w/g turbo, intercooler, PwrFC,

Tyres: Bridgestone Potenza RE540s

Brakes: bendex ultimates Front, RB74 rear, rotors standard

__________________

Updated Winton time - 4.5s off my previous PB to a 1.35.2. Very happy. (updated original post)

Mostly due to upgraded brakes and modified transfer case. Anyone with a GTR that's keen on track work the upgrades to the transfer case is one of the best mods I have ever done to my car.

ahh I got to knock 1 sec of my wakefield time today, but I am cheating now :D

SAU Nickname: Duncan

Car Make and Model: 32 GTR N1

Circuit Name: Wakefield

Lap time: 1.10.2

Modifications

Engine: Standard N1 spec

Power: tba

Suspension: some jp coilovers

Tyres: Dunlop DZ02G

Brakes: standard

Body weight: 1460 wet

ahh good question that was Andrew that has made transfer case mods, I assume more clutch plates? personally i reckon the controller acheives the same end but I would have to try em back to back.

How is your additional block ventilation mod going?

andrew what did you do to the transfer case? and mind telling me what pressures (HOT) to run the RE55 tyres :D

I was at wakefield on saturday.... however had oil catch can issues! hmmm back there on the 11th to try again!

how do we go about timing for the no speed limit days?

cheers....

ahh good question that was Andrew that has made transfer case mods, I assume more clutch plates? personally i reckon the controller acheives the same end but I would have to try em back to back.

How is your additional block ventilation mod going?

Duncan guessed right here. I've never used the controllers but I have been told there are some advantages of the transfer case mods over the controllers - how marginal the difference is I'm not sure so like Duncan could only tell with a back to back trial. But god damn through the tight stuff it's made a huge difference.

Ben - I run my RE55's at 30psi hot.

:rofl:

duncan now all you gotta do is drive a 31 round the track. here is chris' effort

SAU Nickname: Chris

Car Make and Model: HR31 GTS-X

Circuit Name: Wakefield

Lap time: 1.12 (something decimal pointish)

Modifications

Engine: R32 RB20DET

Power: 160kw from last count

Suspension: HD Coilovers

Tyres: turanza or some e30 stuff

Brakes: R33 4-pistons at front, R32 at rear

Body weight: 1400

Actually Chris was doing some great laps considering the drives a POS 31 :D but the tyres he was using were dunlop D01J. Hope he makes it to the drift nats in Adl OK :)

I was out there last monday, Powerplay had a private track day and I took the opportunity to give the car a final shake down before the state champs at Oran Park this weekend. It ran great except for the cracked rear rotor so I should be out there OK.

ahh good question that was Andrew that has made transfer case mods, I assume more clutch plates? personally i reckon the controller acheives the same end but I would have to try em back to back.

We found with just the controller, it would get some slip towards the end of a race and the oil temps would climb rapidly. No slip with the additional plates, last the whole race and lower transfer case oil temps all the time.

I took the opportunity to give the car a final shake down before the state champs at Oran Park this weekend

:goddam: I had better ring around and warn everyone.

:)

PS; Only kidding :innocent: good luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update time!  The JZX110 had some maintenance needing to be done, so a lot of the seals with replaced to fix some oil leaks. Also used this opportunity to whack on a front mount that I'd bought some time ago.  I also finally got the rear lip painted and fitted.  I then got the exhaust done. It's just a catback for now. Custom made 3" stainless with a turn down. I could have a tip coming out, but it will require cutting the rear lip and possibly the bumper itself. So far I do like and it's made the car a little more zippy.  Close out with some nice pictures of the cars and a sneak peek of what's next. 
    • Once you learn it all, you find you do the job once. But this is the best way to learn, as you won't forget the lessons
    • Edit: It's now known as "R Performance" and is still in operation.
    • This lady loved her FD for 25 years!  https://www.topspeed.com/80-year-old-woman-donates-fd-rx-7-mazda/ My brother in law. He's nice enough to let me drive it whenever. He'll likely not see this, but I'll try: @r-is-for-fun got any pics?
    • Just something I found searching for more info on Emotion R, apparently the ECR33 Skyline GTS25t was either originally black, or there were two of them, the black one being the original demo car, then building a white one which was part of the 1997-onwards (to at least 2008!) Cockpit Tatebayashi Tokyo Auto Salon booth demo cars. It appears that Emotion R closed down in 2008 and was declared bankrupt in 2010: http://bank-db.com/hasan/208365. Scan of a magazine with the black R33 from 1996: Wayback machine archived page from May, 2000: https://web.archive.org/web/20000529061027/http://www.emotion-r.co.jp/skyline.html Option magazine with a few photos from the Cockpit Tatebayashi booth at the Auto Salon from various years: 2002: http://www.jdm-option.com/photo/index.php?action=item&category_id=154&image_id=3507 2003: http://www.jdm-option.com/photo/index.php?action=item&category_id=137&image_id=3033 2005: http://www.jdm-option.com/photo/index.php?action=item&category_id=116&image_id=1831 In 2008 Cusco website mentions that the Cockpit Tatebayashi ECR33 was displayed at that year's Tokyo Auto Salon: https://www.cusco.co.jp/event/2008/12/post_735.html As of 2021 it appears that the ECR33 demo car ended up being exported to Florida, USA: https://rmcmiami.com/inventory/1996-nissan-skyline-r33-cockpit-tatebayashi-demo-car-big-te06-turbo-endless-brakes-lsd-450hp/ And finally here's Google streetview of the Emorion R garage in 2023 which is amazingly not only still there, but the showroom is still full of various parts in stock and funishings, etc.: https://maps.app.goo.gl/ttyEAZdZLyzermyT9 Apologies for nerding out a bit. I used to love doing this 20 years ago on SAU and got a bit nostalgic for a moment... 😅
×
×
  • Create New...