Jump to content
SAU Community

Recommended Posts

Thanks Duncan,

Been here a while though....just in the Stagea area hiding...lol....finding out about the world of the M35 Stagea....big learning curve!!!

Love to bring the R31 out to a track day but to expensive.....we only really use it for racing and maybe a test day every now and again to bed in new bit's or test/sort out something...if the timing's right though we might be able to make one of your track days and use it as a bit of a test session.

Would bring the M35 ARX but it might end up on the roof....bloody fat cow it is....and the brakes are next to useless...lol.

Edited by Jetwreck
1.20 wakefield absolutely pouring rain and first time

I can vouch for that - it was pouring rain and cold on Saturday. I got a 1:16.4, but I'm not telling you what I was driving for fear of ridicule on this forum! My Datto track car is in pieces thanks to a spark plug 'picking up' the thread when I tried to remove it... of all the stupid little things that can go wrong prepping a car for a track day! So I took my road car down there instead. I think I could have gone a little quicker in the later session if it wasn't for the bloke in a shitbox proton rally car cutting half the corners and dragging heaps of mud onto the track just after all those apexes...

sorry Chris, didn't even realise at the time that anyone I'd know was there, apart from Marty. I should have, I saw your username on that other forum, but it just didn't click. I think after the 1180km drive on Friday my brain wasn't really operating all that well on Saturday. And apart from the stopage for the crashed Evo when I went back into town, it was all happening pretty fast out there.

there was someone else from SAU out there, who I was talking to for a while but I wouldn't have a clue what his username is. He's been thinking about buying one too, but was worried about how they handle until he saw mine out there on Saturday...

Edited by hrd-hr30
Peterm13, what club are you running the sprints with? SAU/WRX are off to Winton on the 9th Feb. Didnt like Winton at first bu the place is growing on me :)

PIARC at the moment. still havent got round to calling you with my q's about joining SAU vic. cbf doing winton yet too far, maybe later in the year. for now sandown and PI are doing me fine.

  • 2 weeks later...

SAU Nickname: Stig O'Tracy

Car Make and Model: 93 R32 GTR

Circuit Name: Wakefield

Lap time: 1:18.4 - damp/wet patches

Modifications

Engine: Front Mount / Exhaust

Power: approx 210kw (UAS dyno)

Suspension: front and rear strut bars otherwise standard

Tyres: RE55

Brakes: standard discs / calipers Ferodo DS2500s

Body weight: me or the car - both too heavy

First time at Wakie in the GTR and first time out with a proper lap-timer (Mychron). It was pissing down first thing today, drizzled til lunch and lightened off after lunch. Still a couple of wet patches and water running across the track just after Turn 8 (the fish-hook). Should be back in about 4 weeks for another go - hopefully a bit drier......

Mark - was there another GTR out there being driven by a bloke names Jase?

Another GTR (R32 Maroon) - sorry I forget the guy's name. He was there with some others who had an S15 and Golf GTI between them - looked like the Nissan guys were really enjoying coming out of Turn 10! :)

yeah the maroon GTR is my mate!

do you know what times he was doing?

sorry - not specifically. I spoke to one of the group who mentioned 1:15 but not sure which car he was referring to.

  • 2 weeks later...
Update: 1:37.06 for Winton

Only change to previous setup is 2860-5's instead of single T04z.

Arch, you're flying - I can say it's a great set up. We are now officially mechanically even. Should be good head to head.

Regards

Andrew

Andrew

Yep heaps better than the single that's for sure.

Mechanically even you say..hmm there might still be a thing or two you've got up on me still but they're not biggies and I'll try to get em too in the not to distant future *cough* transfer case. But looking forward to the head to head and following you around PI.

Tis around tree fiddy

Andrew

Yep heaps better than the single that's for sure.

Mechanically even you say..hmm there might still be a thing or two you've got up on me still but they're not biggies and I'll try to get em too in the not to distant future *cough* transfer case. But looking forward to the head to head and following you around PI.

Tis around tree fiddy

Ah ok - transfer case - a great mod. I have got one of those attessa controllers to put in after P.I., be interesting to see how the two mods interact.

All I have to do now is try and keep the engine temp under control for 4 flying laps - no mean feat this time of year.

Regards

Andrew

Hey Andrew - on a test day I did at Winton I took 1s off my lap time by giving the Attessa button a couple of clicks. Infact my pb's at all tracks except Calder (where I haven't used it) have been with at least SOME value of input from the Attessa controller. Even though at places like Sandown and Phillip Island it may have just been one or 2 clicks. And I have transfer case mod done as well. The 2 mods act differently in how they effect the cars characteristics.

Hey Andrew - on a test day I did at Winton I took 1s off my lap time by giving the Attessa button a couple of clicks. Infact my pb's at all tracks except Calder (where I haven't used it) have been with at least SOME value of input from the Attessa controller. Even though at places like Sandown and Phillip Island it may have just been one or 2 clicks. And I have transfer case mod done as well. The 2 mods act differently in how they effect the cars characteristics.

Cool, I've been umming and arring about one of those for 12 months and ended up grabbing the very last one that Duncan had.

Just got to gather up the courage to rip my virgin dash trim apart and cut and join a few wires.

Cheers

AA

cmon get the drill out, you'll love it. nissan agreed and added more and more front torque throughout the different attessa version, in fact Andrew's R34 runs about the most stock. It's a shame Mark isn't making them any more, they've raced in Japan, won a couple of dutton rallies, done targa etc etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Been over 2 months since I have done anything on the S15 and had a day off today so got stuck into mounting the radiator and intercooler. I ended up using factory bottom mounts as bolted in and I did order some gktech top brackets but didn't work with the PWR radiator so made up some with aluminium flat bar. Spent way to long on them but pretty happy how they are. Next job was the intercooler. Used some more aluminium flat bar and did the bottom mounts first. Top was easy as just one long piece and 2 90 degree coming off rad support and welded them on. The bumper support required some notching to let the outlets sit where I want so will add some reinforcement later to strengthen it. I have also bought ecu and waiting for it to arrive. Went with a Link g4x Xtreme but will be adding a ptmotorsport expander to add a few extra inputs over CAN. Went through a few different configurations on pclink to get what I want to allow future expansion for sensors and gearbox upgrades. Ordered gktech rear arms but looking at the hardrace lower control arms to have some extra adjustment too will see how the alignment looks after first setup. Got 2 more weeks of work before shut down and will have almost 4 weeks to work on this so planning on hopefully firing up mid January.   Also bought a 2015 brz with a heap of good gear, did noosa hill climb a month back. Owned it for 3 days changed alignment and sent it. Finished the weekend 2nd in class and only .3 off the 180sx best time last year. MCA Red coilovers, gktech rear lca, bolt on lock kit and tie rods, whiteline toe arms, cusco 1.5way diff and 4.5 ratio, endless brake pads, headers, exhaust, perrin intake and e85 tune. Electronic steering adjustment, nankang crs with koya wheels 17x9 +35. Have bought rear traction arm and relocation kit, extended studs and v3 tie rod kit. Planning on also getting flex tune as lucky to get 300km a tank with e85 and short ratio. Car is a heap of fun to drive and super easy to work on. AC in the line up at Noosa was mint in 35degree weather.
    • I'm 22 years younger than you mark, and I'm operating in the exact same way! Ha ha ha
    • All clamps are oem    one question is , what is the bit at the top on high pressure pipe where it connectes to intake manifold and other side goes toward the engine( see item in red circle in diabram attached)   ? Seen some people stating that should be removed on boosted application and skyline is boosted from manufacture so little puzzled. Mine is around 23pwi (700 hpish)   also some state it could be the bonjo bolt crash washer so bought two washers
    • what do you mean dead platform? People buy older, out dated and less power cars on "Dead platforms" for over $65k all the time.
    • That is really nice! Very nice finish when you have an oven to do the crinkling nice and evenly!
×
×
  • Create New...