Jump to content
SAU Community

Recommended Posts

hey guys just purchased a 99 gtr vspec and am having an issue when i come onto boost starts at about 4.5k rpm and gets worse as u accelerate. it feels like im losing traction and the cars rear will kick out to the right. i plan to taqke it to the shop to get it looked at but was just wondering if anyone had an idea of what it might be. It may be something as silly as a boost leak or something, ive come from an sti and ive had boost leaks before doesnt feel anything like that tho car shakes and feels like its jerking back and forth throughout the rev range. car is completely stock no mods other than pirelli p zeros all round no engine work done. if i let the boost build up slowly it wont freak out and cause the problem only when i hit full boost it will start ripping up the tyres and sliding out. ive checked for boost leaks spraying on ic pipes etc but no luck so far locating the issue could this me a afm issue or something to do with the air/fuel raitos? the restrictor pill was removed by owner in japan and is running 1bar.

sorry if this was a silly question or has been answered elsewhere, i just cant put my finger on it!

(not trying to troll )

Edited by v-specjay

Have you considered that you are now driving a RWD biased AWD car and it could actually be losing traction at the rear simply because it is losing traction?

There may or may not be an alignment problem or worn bushes or subframe mounts etc etc that might be causing it. It doesn't HAVE to be coming from the engine end of the car!

If its standard as you claim it shouldn't be doing that.

But if its modded.....fully sik. :)

On a serious note, my GTRs rear use to come out under power, she would crab walk, ended up being the subframe bushes were leaking and i put some alloy C rings in place to stop it, she went straight after that.

Itsat standard vspec height its sitting on original suspension also yes it still has original coil packs. I will have to look into the subframe bushes hopefully something turns up..n yes gts boy i understand that its not a full time awd but this is not just simply breaking traction due to power from the rears its more like when i come on boost imagine like fuel surge bunny hops and makes the car break traction and jerks the car forward and backward similar to what youd feel when you have a large boost leak..soo frustrating!

It could be the ATTESA system that also activates the rear A-LSD on a R34 V-SPEC needs bleeding

Either way it sounds like the car has some issues, best off getting it to someone that knows these cars so they can give it the once over

  • Like 1

If boost (positive pressure) Is only coming in at 4.5K rpm on standard turbos you have issues... Are you sure this is the case as per your post???

**edit** i think i misread due to punctuation... You are on boost, then at 4.5K rpm you have traction issues

?

Edited by djvoodoo
  • Like 1

It could be the ATTESA system that also activates the rear A-LSD on a R34 V-SPEC needs bleeding

Either way it sounds like the car has some issues, best off getting it to someone that knows these cars so they can give it the once over

Oh i forgot about the fun bundle that the A-LSD is.

Itsat standard vspec height its sitting on original suspension also yes it still has original coil packs. I will have to look into the subframe bushes hopefully something turns up..n yes gts boy i understand that its not a full time awd but this is not just simply breaking traction due to power from the rears its more like when i come on boost imagine like fuel surge bunny hops and makes the car break traction and jerks the car forward and backward similar to what youd feel when you have a large boost leak..soo frustrating!

Ever experienced axle tramp?

  • Like 1

Yep the tyres are all the same size, i think it sounds like axle tramp, never experienced it before but sounds on par with whats going on with mine. Thanks guys and

  • XKLABA i will have to check out the attesa see if it needs bleeding. Could be a combo of all of these things just helps to narrow it down a little.

Cheers for the info guys ill report back after a once over from my mechanic if anyone is curious as to what the problem was.

If a stock R34 GTR is breaking traction it has a 4WD problem of some sort, or very very shit tyres, if it has a 4WD problem and is a V-Spec it will most likely have an A-LSD problem to

A small air pocket won't kick a code but will slow down the operation speed of the diff and 4WD

Lol. How can it break traction and jerk back and forth.

Axle tramp is like a hopping sensation in the back.

Sti and gtr are WORLDS apart in how they drive

yep im not exactly sure mate feels like a little of both at the same time im assuming it has something to do with the attesa ill take it to croydon see what they make of it

If a stock R34 GTR is breaking traction it has a 4WD problem of some sort, or very very shit tyres, if it has a 4WD problem and is a V-Spec it will most likely have an A-LSD problem to

A small air pocket won't kick a code but will slow down the operation speed of the diff and 4WD

ye exactly it feels like the torque is being split up unevenly or delayed, i have a feeling your on the money.

Edited by v-specjay

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car revs up through the gears much better/faster now, and fuel consumption doesn't really seem to have be affected either on a Hwy cruise, which wasn't expected  The FAB9 intake manifold has been problematic sourcing though, I've contacted Plasmaman to ask about their intake, which you can get different runner lengths spec'd, and, their different options for throttle bodies  The only real physical drawback with the Plasmaman intake is how to connect it to my current OEM style airbox, as FAB9 make a OEM style back half of the airbox to suit the larger diameter throttle body, and all that is required is a 30°bend silicone pipe to mate the throttle body to the airbox Car also goes in for some exhaust work in a week or so to fit the biggest resonator they can fit clearance wise in the front pipe to help remove some of the drone, there isn't alot of realestate under there, a rough guesstimation is it will only be about 3-400mm long and maybe 90-100mm diameter, and with a 60mm exhaust that doesn't leave alot of space for the internal volume of the resonator to do its thing I'm thinking I may need to bin the "high flow" 100 cell cat for something a bit more substantial, yeah, and restrictive, like a 200-400 cell, to help, but, I have ample room for a really large bodied cat to replace the current one which has around a 4" diameter body I may look around in the recycling bins and see if I can find a massive newish cat that was "replaced" with some new full exhaust system that the local exhaust shop in Western Sydney is doing
    • Hahah look at that smile 😂 Just like those ones on IG where they compare the husband in family photos vs husband going fishing lol. I don't think I'll participate this time, clutch isn't in and also the last time I went there were too many numpties on the cruise sessions. Nearly caused a few accidents holding up people and a few guys initiating massive kerb to kerb drifts with heaps of cars right behind them. Not to mention, there were guys on the track session using it as a power cruise session.
    • Is there an actual website thingie for peoples who don't have Facebooks? Cheers
    • All Jap Day is coming up again! 13th of July this year. Are you going? Tickets go on sale on Wednesday 6pm. Please let Quang know as well. https://m.facebook.com/photo.php?fbid=1163155775853542   I still get shit from my wife for this photo because it is the happiest she has ever seen me. And it's not with her, it's in someone else's car.   Quang's EVO is sick, but that rotary wagon flying past was absolutely bonkers.  
×
×
  • Create New...