Jump to content
SAU Community

Recommended Posts

have my mid mount gtx3071 .82 of my r32 for sale.

turbo/wastegate/bov/fabwork/lines are all no more than 3months old with MAX 3000kms, I fitted the turbo drove to queensland did matsuri and drove it home, I then broke my leg not long after and car has sat in garage since.

I want to sell it all together at the moment but will eventually break it up if no one is interested, this is perfect for someone wanted to save some cash and avoid police issues by keeping stock manifold and out of sight mid mounted. will fit 32/33 will fit r34 but not sure if it will match up to stock air box location? will also fit ceffy and rb20/25 powered car basically

contains:

gtx 3071 (new type with the upgraded bearing cartridge) . 82 coated housing with 40mm turbosmart welded to housing with stainless screamer pipe.

40mm turbosmart with upgraded 14psi spring

custom intake pipe suit afm and airbox with bov return

30mm stealth turbosmart plumb back bov

standard manifold with longer studs/nuts and spacer to suit

heat sheild

2x genuine Nissan turbo gaskets

speedflow oil feed line and fittings

speedflow coolant lines with fittings

custom oil return with quality oil specific silicon hose joiner

cross over pipe with bov to suit intake pipe

3 inch v band dump to suit r32/r33 with v band clamp

hks elbow to suit plumbing

basically all you need to fit up to your car and away you go (bar one coolant line that im keeping)

made 275kw on 21psi pump 98 on my rb25. with dodgy boost controller.

builds boost from 2k and comes on song 3800rpm has more in it with proper boost controller.

drives really nice motor loves the housing revs very free now.

I also have a greddy return flow cooler kit that fits this all, can do a combo deal if someone wanted everything.

this is a legit no expense spared kit I never planned to sell but as usual a bigger turbo setup came up for sale that I couldn't pass on.

i am in Hornsby for pickup or can send aswell, if you want more/better pictures msg me and ill be happy to send through

chasing $2800 for everything, can take parts out for cheaper, either way if someone wanted to do this setup half the works already done

0419469108

cheers harry

post-48133-0-25950900-1452908368_thumb.jpg

post-48133-0-68709300-1452908423_thumb.jpg

post-48133-0-23910800-1452908515_thumb.jpg

post-48133-0-00561700-1452908551_thumb.jpg

post-48133-0-69623500-1452908571_thumb.jpg

post-48133-0-75329500-1452908592_thumb.jpg

post-48133-0-81328000-1452908648_thumb.jpg

post-48133-0-51639800-1452908666_thumb.jpg

post-48133-0-82469300-1452908731_thumb.jpg

post-48133-0-85047900-1452908761_thumb.jpg

post-48133-0-52702600-1452908786_thumb.jpg

post-48133-0-99090600-1452908808_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...