Jump to content
SAU Community

R34 Gtt Front Indicator - Bulb Holder

Manuel Kasko

By Manuel Kasko,
in Australian Capital Territory

 Share

Recommended Posts

Manuel Kasko Grand Master

Manuel Kasko

Posted
Posted

Hey guys,

I just put a series 1 front bar onto my series 2 R34 GTT. Now I'm stuck in a pickle as the two front indicator bulb holders don't fit into the sockets as they are different on each model.

Does anyone have any idea where I could source some?

I tried supercheap and unfortunately their generic one wouldn't fit.

This is the old one, which my indicator plug fits into, as you can see it's slightly different.
CQfJIeX.jpg

This is the new one, which my indicator plug does not fit into and the supercheap does not fit into.

Fd2ibVI.jpg

Link to comment
https://www.sau.com.au/forums/topic/462380-r34-gtt-front-indicator-bulb-holder/
Share on other sites
Manuel Kasko Grand Master

Manuel Kasko

Posted
  • Author
Posted

What exactly from supercheap did not fit?

The socket looks like a regular t10 or t20, can find tons on ebay.

Hey John,

This is the part that I got, it looks to fit the old one, but not the new one.

The difference between them seems to be that one has a slightly off-center groove, where as the new one is directly opposite each-other.

http://www.supercheapauto.com.au/online-store/products/SCA-Universal-Globe-Holder-Suits-BA15S-Globes.aspx?pid=325158#Recommendations

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • SeanR32GtSt
      Hypergear Turbochargers and High flow Services Development thread

      By SeanR32GtSt · Posted

      Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
    • GTSBoy
      R34 Manual conversion Speedometer

      By GTSBoy · Posted

      He means "as opposed to mechanical cable drive". Older cars (R32 for ex.) had cable drive. Later cars with essentially the same gearbox, ie R34 GT (NA RB25) used essentially the same box as the R32 GTSt, but instead of a cable drive, had an electronic speed sender plugged into the same hole in the box, running from the same little gear that would have run the cable. Some of the shittier later cars use a speed sender on the nose of the diff, or the ABS sensors.
    • GTSBoy
      Hypergear Turbochargers and High flow Services Development thread

      By GTSBoy · Posted

      Lower than engine, or lower than it should at the hubs? Either way, that is a nice power figure and I'm not surprised you say it rips now. What stopped you from turning it up any more? Injectors? Or did it just stop responding to boost?
    • SeanR32GtSt
      Hypergear Turbochargers and High flow Services Development thread

      By SeanR32GtSt · Posted

      Got my 34 gtt tuned last week. Car made 362 wheel horsepower at 19 psi. Turbo was the ATR43SS. Only other upgrades were haltech 2000 series. 650cc injectors, walbro 250, fmic. Pro hub dyno reads 6% lower than actual figure according to my tuner. Car is a real ripper now.  IMG_7261.mov
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Hi everyone, I'm wondering if anyone in Melbourne (preferably West) has a non-S2 R34 front bar. If it's already off the car, even better!  Nothing too weird, I just need to get a cut-out of the hole that the front indicators clip into 🤣 (image attached for reference)   I've got a front bar from JSAI Aero, but those holes need to be cut myself, and I want to get it right so the indicators will clip securely. And my OEM bumper is a S2, so I have no reference. So looking for a member who might be able to spare me a few minutes to make a cardboard cut-out using your front bar.
×
×
  • Create New...