Airbag Light With Aftermarket Seats

[Philr32]

Hey everyone is there anyone/anywhere that sells the airbag harness to get rid of the airbag light once aftermarket seats are installed? If not I'll just try a 2ohm resistor, would prefer a neat plug if possible though. I've seen posts about NISMO making a harness, can't find anywhere actually selling them though.

TIA

[joshm35]

Just do the reset ptocedure

[Philr32]

Already have, still on. Suspect it's due to the seats being changed so nothing for the yellow plug to plug into

[Philr32]

Light went away for a few seconds (probably while it was scanning and thinking or whatever)

[Duncan]

Yes you will get an error, and yes the correct resistor will clear the error.

I assume it's not in an 1993 R32 Skyline GTST, its probably a 5ohm resistor if it's M35 or 2.7 for C34 but I'm not certain

[scotty nm35]

I have been looking for the cancellation plugs myself, they are sold with Bride seats. I need a pair for a V35 but getting parts from Japan is hard with the language barrier. Nothing suitable on Yahoo afaik.

The M35 and V35 should be the same resistor as the G35 or 350z, so look up what they use.

[Philr32]

Yes you will get an error, and yes the correct resistor will clear the error.

I assume it's not in an 1993 R32 Skyline GTST, its probably a 5ohm resistor if it's M35 or 2.7 for C34 but I'm not certain

Yea it's an M35, R32 was my old car

[Philr32]

I have been looking for the cancellation plugs myself, they are sold with Bride seats. I need a pair for a V35 but getting parts from Japan is hard with the language barrier. Nothing suitable on Yahoo afaik.

The M35 and V35 should be the same resistor as the G35 or 350z, so look up what they use.

I had a quick look at the 350Z pages the other day and I think they said 2.2ohm or 2.7ohm, will have more of a look.

[V28VX37]

I have been looking for the cancellation plugs myself, they are sold with Bride seats. I need a pair for a V35 but getting parts from Japan is hard with the language barrier. Nothing suitable on Yahoo afaik.

The M35 and V35 should be the same resistor as the G35 or 350z, so look up what they use.

Have you tried Jesse Streeter? He's been good at tracking down random parts for me.

[scotty nm35]

Have you tried Jesse Streeter? He's been good at tracking down random parts for me.

Yes, first port of call.

[Philr32]

I hadn't thought of streeter. Seems like easiest thing is to see what V35/350Z peeps have done

[DrLui]

Done a bit of reading up on this, and found this thread. Wondering if the DIY in the bellow link would work with our M35's

http://g35driver.com/forums/audio-video-electronics-diy/158005-diy-cancel-airbag-light-proper-way-07-weight-sensor-bypass.html

[Philr32]

Done a bit of reading up on this, and found this thread. Wondering if the DIY in the bellow link would work with our M35's

http://g35driver.com/forums/audio-video-electronics-diy/158005-diy-cancel-airbag-light-proper-way-07-weight-sensor-bypass.html

A shame the pics no longer work. I'm going to have a look at my OEM seats and have also asked amayama if they can get NISMO airbag harnesses plus I'm going to look into the 2.2ohm resistor, see which one works out best/easiest.

[Philr32]

Does jaycar or similar sell the airbag plugs like on the seat?

[scotty nm35]

Does jaycar or similar sell the airbag plugs like on the seat?

No. just cut the wires and solder/heatshrink

[Philr32]

Damn, was hoping to avoid that.

[joshm35]

I have a spare nissan yellow plug if needed. I installed one under my passenger seat as it was hard wired and sourced 2 for my 350z seats. Its a simple install but still need to solder and heat shrink. You will also need to do the airbag light reset procedure to clear light.

Edited February 15, 2016 by joshm35

[Philr32]

I have a spare nissan yellow plug if needed. I installed one under my passenger seat as it was hard wired and sourced 2 for my 350z seats. Its a simple install but still need to solder and heat shrink. You will also need to do the airbag light reset procedure to clear light.

I may end up taking you up on that offer, cheers. Soldering and heat shrinking I can do. Thanks

[Philr32]

Success! The 2.2ohm resistor for each seat worked. No more airbag light. I just did it this afternoon, will keep an eye on it but don't see why it should come back.

[Daleo]

Success! The 2.2ohm resistor for each seat worked. No more airbag light. I just did it this afternoon, will keep an eye on it but don't see why it should come back.

Nicely done!