Airbag Light With Aftermarket Seats

[West]

On 3/9/2016 at 6:34 PM, Philr32 said:

Success! The 2.2ohm resistor for each seat worked. No more airbag light. I just did it this afternoon, will keep an eye on it but don't see why it should come back.

Which wire did you add the resistor in?

[Duncan]

The wire goes between the 2 wires in the plug. If you have 4 wires you need 2 resistors and to work out which pairs go together

[scotty nm35]

I measured my Bride adapters quickly and got 0 ohms.
I suspect it's just a switch in the seat to tell the airbag ecu there is someone sitting in the seat, but stuffing around with various resistors could end in tears. Has anyone researched what the G35 guys are doing?

[DrLui]

14 hours ago, scotty nm35 said:

I measured my Bride adapters quickly and got 0 ohms.
I suspect it's just a switch in the seat to tell the airbag ecu there is someone sitting in the seat, but stuffing around with various resistors could end in tears. Has anyone researched what the G35 guys are doing?

Posted earlier in this thread
http://g35driver.com/forums/audio-video-electronics-diy/158005-diy-cancel-airbag-light-proper-way-07-weight-sensor-bypass.html

The photos aren't there any more but it is helpful