Jump to content
SAU Community

R34 Gtt Wont Idle

Ry_R34GTT
 Share

Recommended Posts

Ry_R34GTT Apprentice

Ry_R34GTT

Posted
Posted

Hey so i have googled and searched through the forums quite a bit and would still like a second opinion. For a while my 34 was having coil pack issues, one cylinder not firing occasionally and sounding like a truck/loss of power. The other day i was driving as per normal and all of a sudden under throttle i was losing all power and felt like MASSIVE drag so i pulled over. At this point it was idling fine and would rev through the rev range perfectly but once in first gear id take off normally and after about 2 meters it would have a huge power loss and drag. I managed to get the car home 2 meters at a time as i didn't want to leave it on the street (really bad area) and then had to reverse up my drive way as it was the only way i could get it up there ( too much power loss in first but not in reverse). I let it sit for a bit and now when i start it it starts perfectly and then dies straight out. If i giver it some throttle it is fine but is spitting out black soot and will stall once it hits idle.

After hours of research i came up with the either AFM was not working, vacuum leak or faulty idle switch. So i pulled it apart the AFM and re soldered it and still no good. My question remains is the AFM faulty or is the idle switch faulty? any ideas? :D

Kinda losing my mind haha

Link to comment
https://www.sau.com.au/forums/topic/462964-r34-gtt-wont-idle/
Share on other sites
SE skyline Rookie

SE skyline

Posted
Posted

So were 5 wet?

Was it running than you removed them so they could have gotten wet. Plugs that work will not be wet because they burn the fuel. If it was running rough than you pulled plugs than they could have a chance to get fuel on them on the cylinders that are not firing.

SE skyline Rookie

SE skyline

Posted
Posted

I had one stuffed coil pack and it made my car miss fire intermittently. One spark plug looked a little different in the fouling. Because it was only sometimes it had not changed the plugs appearance a lot. I changed all coil packs as my car has done 185000km and I just bought it so I don't know when they were last changed. Either they have done a great amount of KMs or they have been changed once before as they normally last about 100000km.

Ry_R34GTT Apprentice

Ry_R34GTT

Posted
  • Author
Posted

sorry for the late reply i have been away. All the other plugs looked perfectly fine as i replaced them maybe 4 months ago or so but one was black and dry none were wet. Just before i went away i found a rather big split in one of the main intake hoses and i have just replaced that but the battery is dead so i have to wait for it to charge to see if it changed anything. :)

Ry_R34GTT Apprentice

Ry_R34GTT

Posted
  • Author
Posted

So i started her up and she started fine and went to die. Gave a little bit of throttle and she settled on idle so i let her warm up for a bit. Revs through the rev range beautifully but now at idle she sounds like shes missing occasionally so i disconnected each coil pack one by one and it sounded worse every time so the coil packs arent the problem. This problem is unrelated btw it was doing this for a week or so before she died.

Ry_R34GTT Apprentice

Ry_R34GTT

Posted
  • Author
Posted

Went for a drive and she is pulling harder than she ever has been and my boost gauge was only hitting 7 psi instead of 10? Then i popped a hose that i must not have tightened properly but i lovely lady with a 200 sx came running out of her house with tools so could get it home haha

Ry_R34GTT Apprentice

Ry_R34GTT

Posted
  • Author
Posted

I know im just a little slow haha :)

I believe all my problems have gone away now after i fixed the boost leak and cleaned the IAC Valve. No weird idle and car has alot more power but kinda feels like it pulls back slightly once it hits boost. Thanks for the advice tho Hadouken was very helpful :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • weikleenget
      R32 GTR clutch master cylinder adapters

      By weikleenget · Posted

      I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Kinkstaah
      MLR's Bogan cruise ship

      By Kinkstaah · Posted

      Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • sonicii
      Mechanic in Victoria

      By sonicii · Posted

      I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...