Jump to content
SAU Community

Recommended Posts

1000cc injectors is way to small for 500kw on e85.....

Or at least a Aussie 500kw that is.

this finally someone hit the nail on the head

But we are comparing American pony power vs Australian horse power

Odd..... I have made over 900whp on a 3" exhaust. Even that much must cover our apparent over zealous dynos.

I think low 500 horse power at the wheels on a gtr your pushing shit uphill with a 3 inch exhaust!

how you achieve an extra 400 horsepower Power from the same size exhaust has me wondering if mushrooms are to blame [emoji23]

Sorry, I mean that camaro. I'm interested in what it trapped

Sorry but no. That car was built for speed competition such as standing mile events (see: The Texas Mile). The car did 168mph at the half mile & 203.8mph at the mile marker.

We have another camaro that made a touch over 750whp. Also through a 3" exhaust, it frequents the 1/4 mile often. Best pass to date on a stock short block & stock auto trans is 10.3 @ 137mph @ 4160lb

That car has a similar turbo system as the higher power car, just a much smaller Precision 7175 turbo.

Edited by Jc052685

This is the best result i have seen, this engine is about as built as they get,

2.8 stroker

Naprec/HKS prepped and ported head with OS valves

260 x 10.85 custom cams with very serious springs, forget brand :)

Port matched manifolds attached to Racepace modded -5s

Full maf less hard pipe kit from air box to plenum

Nismo intercooler and Nismo Plenum

ID2000s with twin 044s on a custom surge tank

Ross trigger wheel setup

And twin 3" exhaust

Plus heaps of supporting gear

post-36620-0-93622900-1455783127_thumb.png

post-36620-0-14279200-1455783153_thumb.jpeg

Just got the OK to post this from the owner ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
    • Yeah, my offer was more to show exactly how rough and ready the rig can be and still be useful. Youtube vids will definitely show cleaner setups. Same concept though.
    • I would guess the seal has gone down at the speedo drive and gearbox oil has crept up the drive cable sheath and fouled the speedo head.
    • Any updates on this? Although not a stroker, nor built especially loose, my car has the exact same symptoms. Although I feel they were not there to begin with. Since rebuild with forged parts I have done about 40k kms and it feels like during the last 15k or so, the oil consumption has gotten progressively worse.  Compression test showed - what I thought at least - similar 10-10.5bars in each hole without oil. I have not yet done blowby test though, due to limited garage access. #2 plug is the looks the most foul and that was the one with 10bars. Nothing in the breather tank. I only recently disabled PCV and left only the hoses running from the valve cover via smallish tank to turbo intake pipe there and did some mildish 2nd gear pulls so the car was definitely on boost (1.4bar or so). Removed a hose from the tank and it was basically dry - meaning, the wipe I used had basically no oil on it. Last time I checked, the turbo and IC piping seemed dry as well (will have to see about that again after those pulls). For the past year and a half though, the car has been driven like a granny would for 99.99% of the time, since it mainly serves the purpose of carrying the family around nowadays. A lot of slow, stop and go city driving and most of the trips it barely sees any boost, but gets up to temp properly every time. Although there can be weeks it is not started at all. The car does not smoke, or at least not that I can see. (CAT is in place though). There is slight visible sweating at the Ex cam cover seal and I recently tightened the oil cooler lines as there was some mist on them too. It runs and idles extremely nicely and feels all around healthy. Like TurboTapin, I too am suspicious of my turbo. I have had IC pipes pop out from 1.6-2bars of boost a half a dozen times during the years. The turbo is a HX35/40 hybrid. So, a very similar mystery. Around 1500kms and a litre of oil surely cannot disappear to thin air. Apologies for the wall of text, not sure if any of the above is useful for best guesses/things to check next.  
×
×
  • Create New...