Jump to content
SAU Community

Recommended Posts

Same here, Supercharge but Gold series across all our cars for availability, warranty, cost, configuration variations and performance life. If I can't get these then only Century.

Would love to run the Supercharge AGMs in the Nissans but they don't have the pencil posts and varied post positions available like the Gold series.

  • Like 1
2 hours ago, Dose Pipe Sutututu said:

Looking real nice!

I've moved away from Optima, they aren't of the same quality as they used to be!

I now run a SuperCharge battery (made for Stop/start applications and is an AGM battery - similar to an Optima), not to mention it's an Aussie brand with 3 year warranty.

https://www.supercharge.com.au/car-battery/supercharge-start-stop-car/?post_type=battery_type&p=173

All the in-laws' cars run their SuperCharge Gold range batteries, cheap and phenomenal warranty.

Cheers Johnny, shall look into it...

39 minutes ago, BK said:

Same here, Supercharge but Gold series across all our cars for availability, warranty, cost, configuration variations and performance life. If I can't get these then only Century.

Would love to run the Supercharge AGMs in the Nissans but they don't have the pencil posts and varied post positions available like the Gold series.

Cheers Benny

1 hour ago, Dose Pipe Sutututu said:

I bet you're excited!

Also I would recommend using some form of heat shielding OR wrap your dump/downpipe to prevent your O2 harness melting at the track.

when u say o2 are you referring to the wideband? same same...?!?

as that's just cable tied in that position now til we workout where it will enter the car...

excuse my dumbness, these are the sides of cars that I fail at...

Edited by mr_rbman

For the Wideband O2 sensor I just go through the existing egt floor bung and a Haltech O2 sensor wiring extension harness. Don't want to drill more holes in car than necessary.

  • Like 1
Just now, BK said:

For the Wideband O2 sensor I just go through the existing egt floor bung and a Haltech O2 sensor wiring extension harness. Don't want to drill more holes in car than necessary.

ye that was my initial thinking...

just so I wrap my head around this, both a narrow band and wide band sensor are essentially both just o2 sensors correct!?!

 

1 minute ago, mr_rbman said:

ye that was my initial thinking...

just so I wrap my head around this, both a narrow band and wide band sensor are essentially both just o2 sensors correct!?!

 

Yes

  • Thanks 1
33 minutes ago, BK said:

Wideband gives you an actual afr / lambda ratio, narrowband just signals whether it's richer or leaner than Lambda 1 / AFR 14.7:1.

Clear as now, cheers Ben

54 minutes ago, Dose Pipe Sutututu said:

Just delete the OEM narrowband junk, since you now have a modern ECU.

 

tis already gone, just the one wideband roughly 1000mm from turbo..

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
    • Unfortunately, not only is that not the case, one of the main "Selling points" of safety over comms is they clearly state in writing that there's no need to segregate safety networks from non-safety networks. It always gets intermingled with everything else on an ICS/OT network. 
    • Hello. I have an a31 cefiro but since I am in Turkey we have a CA20S engine. I did some research. Then I found that I can swap with a ca18 but when I heard that it has the similar substructure as the s13. I thought I can swap with an sr20 because the sr20 was used with the s13. So can I easily swap the sr20 on my cefiro or is it difficult? 
    • I used to love stock take. I used to take f**k of a lot of stock. /Rodney Rude.
×
×
  • Create New...