Pm35 Double Din / Aircon

[Ignigknot]

Hi Guys,

Managed to find a 2DIN panel in wood that I have been looking at for a while - can anyone confirm the below?

1) If I plug this in then I will lose the dual zone aircon option?

2) One can swap the button set to get back the dual zone option - my basic digging in FAST shows up part number# 27500-AC500, probably wrong..

3) Other bits needed will be Nissan antenna adapter, Nissan to iso adapter, iso to headunit adapter - from what I can see these are fairly generic and shared with other Nissan's of the same vintage?

Edited February 22, 2016 by Ignigknot

[Ignigknot]

OK - so I think the AC button part# I need may be # 27500-AC505, can anyone tell me the difference?

As an alternative could I buy a readily available silver 2din unit and transplant the buttons?

Thanks guys.

[Ignigknot]

So for future users, this is what worked.

1) Take AC unit buttons off original fascia, remove DUAL button, desolder SMD led and switch from PCB

2) Take AC unit buttons off new fascia, replace blank button with DUAL button, solder SMD led and switch to PCB

3) Use dremel to enlarge opening to fit standard Double DIN

4) Mount head unit to new fascia

5) Plug Nissan dual antenna to single antenna adapter between antenna lead and head unit

6) Remove Black wire (Ground) from headunit to ISO adapter, extend wire and attach to chassis (bare metal location)

7) plug headunit -> ISO adapater into ISO-> Nissan adapter

8) Refit dash

Enjoy.