Jump to content
SAU Community

Stock R33 Series 2 Gtst Flat Spots On Boost

donnaile

By donnaile,
in Engines & Forced Induction

 Share

Recommended Posts

75coupe Grand Master

75coupe

Posted
Posted

I am too having this issue since upgrading my turbo last week ( yet to be tuned), I opened it up on the freeway the other day, all was going well until i got a pop of air from the engine bay and lost boost, all pipes have been checked and only found one lose which did not fix the problem. I have been told the intake manifold gaskets are known for giving in and have been recommended to replace the gasket with silicon??

Yet to be tuned with an upgraded turbo, but opened it up on freeway.

Nah i cant see any problem there

donburtron Enthusiast

donburtron

Posted
Posted

Yet to be tuned with an upgraded turbo, but opened it up on freeway.

Nah i cant see any problem there

He found the problem mate.. a loose hose somewhere but is resolved now

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      One of the things that never seemed right was the handbrake. Put in some nice new Project Mu shoes. We figured the rears were out, so why not. We're right there. My handbrake never worked well anyway. Well, this is them, 15km later. 67fdcf94-9763-4522-97a4-8f04b2ad0826.mp4 Keen eyes would note the difference in this picture too:   And this picture: Also, this was my Tailshaft bolts: 4ad3c7dd-51d0-4577-8e72-ba8bc82f6e87.mp4 It turns out my suspicions that ne side of the handbrake cable was stretched all along were pretty accurate, as was my intuition that I didn't want to drop the tailshaft to swap them on jack stands and wasn't entirely sure about bolt torque. I have since bought the handbrake cables which have gone in. I'm very glad that I went to my mechanic friend who owns an alignment machine to get an alignment before the track day, because his eyes spotted these various levels of "WHAT THE f**k IS GOING ON HERE?". Turns out the alignment wasn't that bad, considering we changed the adjustable castor arms out for un-adjustable castor arms, and messed with the heights. Car drove pretty good with one side of the handbrake stuck on, unbleedable rear brakes, alignment screwy, and the tailshaft about to go flying and generally being a death trap waiting to happen! (I did have covid) (I maintain I adjusted the handbrake correctly, but movement caused shennanigans and/or I dislodged the spring on the problem side somewhat, or god knows what). G R E G G E D
    • 32.det
      My R32 Money Pit & The Headaches That Come With It

      By 32.det · Posted

      Very interesting, im not sure how all those complications fit in to running a haltech instead of a stock ecu but I'm starting to think I'm a bit out of my league.
    • GTSBoy
      My R32 Money Pit & The Headaches That Come With It

      By GTSBoy · Posted

      I just put 2 and 2 together. This is a Neo converted R32. The Neo ECU (in concert with the R34's AC controller) runs the AC quite differently to how the R32 ECU and AC controller do it. If you just drop it all in, it won't work. There is some tricky wiring required, including changing to the pressure switch that the Neo controllers want to see. I don't know what it is, because mine was done by a guru. It was a year or so after I did that transplant before he worked out what needed to be done.
    • Duncan
      My R32 Money Pit & The Headaches That Come With It

      By Duncan · Posted

      Don't assume the AC relay signal from the ECU is +, some models including Stagea use an earth trigger.
    • 32.det
      My R32 Money Pit & The Headaches That Come With It

      By 32.det · Posted

      Hey good to see you on the forums! Haha Considering this cars past with electronic issues I am leaning towards it being a wiring fault somewhere in the engine bay. When testing the ac relay in the fuse box there was no earth trigger. I am probably going to try "bench test" the compressor by giving it direct ground and power to see if i can hear the ac clutch click otherwise I will be pretty sure I have a dead compressor. If it does work then I will be tracing some wiring it seems.
×
×
  • Create New...