Jump to content
SAU Community

Recommended Posts

Gday.

Is anyone able to tell me​ what gearbox is in a R33 skyline, 40th Anniversary if it makes any difference. 3rd and 4th gear grinds into gear so need to find a 2nd hand gearbox but can't find one for the life of me.

GTST Manual by the way​.

Thanks for any help, much appreciated.​

Link to comment
https://www.sau.com.au/forums/topic/463181-r33-skyline-gearbox/
Share on other sites

Try changing the oil in it with redline lightweight shockproof first. You'll need 3.5 litres. It may or may not make your problems go away.

Then it will eat all your synchros away (like it did in my car)

Do not use Redline Shockproof if you want the box to last. I made that mistake, now my box grinds 3rd to 5th.

Then it will eat all your synchros away (like it did in my car)

Do not use Redline Shockproof if you want the box to last. I made that mistake, now my box grinds 3rd to 5th.

The op's box is already grinding. If the shockproof stops it then it would be a win for him.

  • Like 1

EBay. Around $20 a bottle. U will need 4. Depending where u live u may be able to pick up. Alternatively you can get tubes of nulon smooth shift that johnny suggested from supercheapshit auto.

Why does it only have to last a few weeks?

I already put 1 bottle of smooth shift in it, and it didn't really do much.


I'm getting a 2nd box rebuilt so this one only has to last a few weeks until the other one is sorted.

I was suggested put 2 smooth shifts in it, and some flash lube heavy duty oil stabilizer.

I'm more then happy to spend the $80 to have a less grindy gearbox for the time being lol. Still gotta source a gearbox and shit yet :)

How much smooth shift do I stick in it? And is that flash lube heavy duty stuff good enough?

Once upon a time, my GT-R got a split clutch hose (standard rubber). I had to drive the car home with no clutch, only had one use of it to move the car from stand still. Luckily I managed to get a couple of green lights before getting onto the motorway.

You don't need a clutch to drive the car, but if you stop, you'll have to move it on the starter or something.

Don't need a tacho to rev match, can do it from sound and 'feel'. The single synchro gearbox in my R31 is quite slow, but I can drive it smoothly. I can drive my GT-R by lazy rev matching and it's quite smooth (super heavy clutch).

Don't shift quickly, keep the revs up and practice. You'll get the hang of it, then can apply it to your new box :P.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Very decent bit of kit. Definitely black it out I reckon.  
    • Because people who want that are buying euros. The people with the money to buy the aftermarket heads and blocks aren’t interested in efficiency or making -7 power, they’re making well over 1,000hp and pretty much only drive them at full throttle  best way to way make money is know your customer base and what they want and don’t spend money making things they don’t want. 
    • It's not, but it does feel like a bit of a missed opportunity regardless. For example, what if the cylinder head was redesigned to fit a GDI fuel system? It's worth like two full points of compression ratio when looking at modern GDI turbo vs PFI turbo. I'm pretty reliably surprised at how much less turbo it takes to make similar power out of a modern engine vs something like an RB26. Something with roughly the same dimensions as a -7 on an S55 is making absolutely silly power numbers compared to an RB26. I know there's a ton of power loss from things like high tension rings, high viscosity oil, clutch fan, AWD standby loss, etc but it's something like 700 whp in an F80 M3 vs 400 whp in an R33 GTR. The stock TF035HL4W turbos in an F80 M3 are really rather dinky little things and that's enough to get 400 whp at 18 psi. This just seems unwise no? I thought the general approach is if you aren't knock limited the MFB50 should be held constant through the RPM range. So more timing with RPM, but less timing with more cylinder filling. A VE-based table should accordingly inverse the VE curve of the engine.
    • I've seen tunes from big name workshops with cars making in excess of 700kW and one thing that stood out to me, is that noone is bothering with torque management. Everyone is throwing in as much timing as the motor can take for a pull. Sure that yields pretty numbers on a dyno, but it's not keeping these motors together for more than a few squirts down the straight without blowing coolant or head gaskets. If tuners, paid a bit more attention and took timing out in the mid range, managed boost a bit better, you'll probably see less motors grenading. Not to name names, or anything like that, but I've seen a tune, from a pretty wild GT-R from a big name tuner and I was but perplexed on the amount of timing jammed into it. You would have expected a quite a bit less timing at peak torque versus near the limiter, but there was literally 3 degrees of difference. Sure you want to make as much as possible throughout the RPM range, but why? At the expense of blowing motors? Anyhow I think we've gone off topic enough once again lol.
    • Because that’s not what any of them are building these heads or blocks for. It’s to hold over over 1000hp at the wheels without breaking and none of that stuff is required to make power 
×
×
  • Create New...