Jump to content
SAU Community

Recommended Posts

CTP Fraud and the NSW Gov't - "Red Light On Rorts"

A new Compulsory Third Party insurance system that introduces fixed compensation for minor injuries is being planned by the Baird Gov't in an attempt to cut the soaring cost of green slips

Better Regulation Minister Victor Dominello told the DT he also wanted to crack down on green slip fraud, which he said was responsible for adding $75 a year onto our CTP insurance bills.

Mr Dominello said CTP prices had risen by more than $40, or 8%, in the past year, and insurance fraud was a key contributor.

He said the government was seeing fraudulent court claims for minor injuries, including claims for more people in one car than there are seats in that said car, and instances in minor low-speed prangs where claims are made on behalf of babies for psychological injuries and future loss of income.

These claims are costing on average, between $95,000 and $100,000.

The average green slip costs more than $600 and exceeds 34% of average weekly earnings, up from 28% in 2007.

The reforms, to be introduced later this year, would involve a two-tiered system, where less serious claims involve set payouts, as occurs with the workers compensation scheme.

Lawyers have a vested interest in opposing the reforms, and insurance companies are accused of profiting by as much as 20%.

"Both the insurance sector and the legal fraternity will need to come together with the government so we are all acting in the interests of the consumers," Mr Dominello said.

"In this case, it's the interests of the motorists and those injured."

Another change could be a "no-fault" scheme similar to Victoria to prevent costly legal battles where people argue over who's to blame.

CTP prices for the average Sydney motorist have increased by more than 70% on average since 2008.

Further prices of between $60 and $90, or between 10 and 15% have been flagged by insurers , who say they need the additional money to offset increasing claims, including those by fraudsters.

Reported by Andrew Clenell

  • Like 2

I would like to see some data on number of claims and payouts for each one.

Sydney CTP is almost $900 this year. I used to pay $300 and thought that was expensive.

Seems like "more claims" it's just excuse to increase revenue.

Maybe we need better detection of fraud and more serious punishments to deter people. Seems to be another case where its just too easy to get away with it or get a slap on the wrist if you do get caught, so its an attractive option for those without morals. Imagine what could have been avoided if Edward Lees got what he deserved when he was first caught?

Last accident I had the guy had no insurance. Later in the day he went and bought insurance and then asked if I would lie about the date. I said no, and he said "Who's going to pay for my car to be fixed?". FFS what do you think happens when you dont have insurance!

  • Like 1

Yes, Adam, I wonder if the people who do these things are motivated by greed or desperation or both. Maybe, it's even in a person's makeup.

During the State Mines fires in the Blue Mtns, I went up to a fruiterer who collects rare Commodores.

He's not devoid of money whilst he and his wife own lots of commercial property through the main street of the suburb I live in.

Anyway, he came outside (out of earshot of his wife most probably), and quizzed me on who would grant him an immediate cover on his Holdens.

I said wtf T*** don't you have them covered?
He said that they're stored and he didn't think that they could all go up in smoke until the N-W wind started blowing hard.

I said you're the effin reason why we're paying such high premiums - 'fair weather friend'.

What a bum!

  • Like 2

I'm still unclear on exactly how Andrew Clenell performed CTP Insurance Fraud?

The market seems to be a good example of a government formed oligopoly with everyone sharing cosy, comfortable profits to me. I am hugely doubtful that fraud is the main cost driver and would love to see some actual evidence rather than quotes from the insurers who are trying to defend why their profits should continue....

  • Like 4

I'm still unclear on exactly how Andrew Clenell performed CTP Insurance Fraud?

The market seems to be a good example of a government formed oligopoly with everyone sharing cosy, comfortable profits to me. I am hugely doubtful that fraud is the main cost driver and would love to see some actual evidence rather than quotes from the insurers who are trying to defend why their profits should continue....

2nded.
  • Like 1

There is a big shake up coming in the CTP industry, and the state govt and insurers attempts to more than triple the price of CTP 2 years ago were comprehensively thwarted; largely by the lobbying efforts of motorcyclists.

They want their money though, and they'll smear anyone but themselves to protect their gravy train.

  • Like 1
  • 2 weeks later...
  • 4 months later...
There is a big shake up coming in the CTP industry, and the state govt and insurers attempts to more than triple the price of CTP 2 years ago were comprehensively thwarted; largely by the lobbying efforts of motorcyclists.

They want their money though, and they'll smear anyone but themselves to protect their gravy train.


I was one of the organisers of the protest in the Sydney CBD for that. You need a big event to get the pollies to even pretend to give a shit and try to stop you getting fleeced
  • Like 2

I'll add something to this though. It is impossible to organise something that benefits a group especially one like motorists without special interest people high jacking it. The biggest failing with the CTP rally was that the pressure was hardly maintained. The head of the motorcycle council was only interested in using it as a soapbox for his ambitions and the police treated it like a patch club gathering. While car clubs are wide and varied in Australia and something bit could In theory be organised, the line between success and failure is sooo thin. The media are always looking to paint car people as hoons and the motoring council is more geared towards old people. Sensationalist media and the car scene will never mix. And we all no pollies will lie to your face and promise the world till their portfolios change. And that's what happened with the roads minister after the protest.

  • Like 1
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it's magnetic what is stopping you from using a magnet on a thin wire from fishing it out?
    • Those 2 solenoids in that assembly I mention, are the PWM solenoids for torque converter lock-up clutch & EPC (line pressure control) ~ when most folks hear of 'solenoid failure', the tendency is to think electrical failure...but fact of the matter is, especially wrt the EPC solenoid (which is moving/running all the time), you can have an electrically 'good' solenoid, that's absolutely broken/worn out mechanically inside...ie; valve plunger return spring rubbing against spring retainer plate, lowering preload pressure.. ...and the solenoid armature extension limit spring wafer with bad wear/broken off petals... ...and if there's ever been any metal flying about, damage to the valve plunger end itself... ...the stuff one never really sees, unless you go the whole 10yards trying to answer the question "why is my line pressure screwy, but TCU isn't flagging any EPC solenoid fault?"...and carefully dissect the solenoid. Worst (and most probable) scenario is when the plate spring petals break off, they get held by the magnetic flux, get mashed up by the armature into little bits, which end up in the space between the armature & shading core bore, and things get stuck or randomly jam up, and your line pressure goes flat and doesn't change...and the TCU never sees it, as it doesn't actively monitor LP... ..then it gets into insidious land, if you end up with lower than expected line pressure...lets say high clutch..and the lower pressure causes it to slip ~ when I say 'slip', think say 2000rpm on the drive plates, and 1800rpm on the driven plates, because the slip is making them under-rotate by 200rpm ; you get all the usual nasties like heat and band/clutch wear, but even if it's only 20rpm slip the same thing happens...and... you'll hardly ever pick this up driving the thing with the torque converter active as it effectively masks these sorts of slippages that are line pressure related ...(the newer TCUs can detect clutch slip rate)...just  FYI as it were...  
    • There's nothing that some paddle pop sticks and extra cable ties can't fix.
    • Hey guys, so Golebys has good prices on Bosch injectors, and also sell an adaptor to go from 1/2 length injector to standard with the Nissan 10.5mm top seal.  Does anyone know if that adaptor is to suit the 14mm or 11mm injector tops?  And re. The bottom seal, to suit my standard RB20 intake, would I be right in saying I can just slip the 14mm square section O ring over the bottom of the new injector and done? Thanks in advance guy, Cheers, Rowdy
    • F my life. I was changing the oil on my R32 GTR today as usual and ran into a bit of a snag. I drained the oil out and was getting ready to finish the job by tightening the drain plug, however The stupid magnetic oil drain plug snapped in half, right at the magnet part. After about an hour of trying to remove it, I used a drill bit, which unfortunately pushed the magnet all the way into the pan, and just leaving the hollow threaded part of the bolt remaining. I was able to remove the hollow portion of the bolt from the oil pan with some pliers but the magnet is still in there.  So, the question is, should I drop the oil pan to get the magnet piece out, or is it okay to leave it in there? I really dont want to drop the pan, i'm about to go nuts.  PSA: Do NOT buy a BLOX magnetic drain plug. This is the one i had.    https://bloxracing.com/products/magnetic-oil-drain-plug-m12x1-25mm?variant=37131252859052&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gad_source=1&gclid=CjwKCAjw47i_BhBTEiwAaJfPpgti1D2JwO7TDuMpXuqeQPCuIQSAfwxpWQH5rF9MD7sm5SCZDWLR_RoC_YoQAvD_BwE    
×
×
  • Create New...