Rb25 Water Feed Block?

[GT500_Racer]

Hi guys, got access to a older type turbo non water cooled cartridge, i was looking at blocking off the water feed, but im not too sure what the water feed thread on the block is or the bolt size.

What size and thread bolt do i use to block off the water feed on the block?

cheers

[GTSBoy]

Well, it wouldn't be a bolt. Pipe fittings/threads and bolts do not share common threads.

I actually can't tell you what it is because I've never cared. But I can advise you that I'm dead sure it has been mentioned in at least 20 places in the various Kando/Hypergear type threads. I can also say that without access to the internet I would have done it by taking the existing fitting to a place that sells a variety of pipe and hose products and gotten a plug that matches the thread.

[hypergear]

It is M14x1.5

[GTSBoy]

Haha. That makes me wrong then. I take it that's a banjo bolt?

[iruvyouskyrine]

Yep banjo bolt.

[tridentt150v]

Don't forget to change the oil feed, a water cooled cartridge has a different oil rate compared to non's.

[GT500_Racer]

Yeah getting new oil lines made up.

cheers guys, makes life easier now, dont have to pull off the banjo bolt and run around looking for the right size