Link G4 Plug In, Link 7 Bar Map Sensor

[Piggaz]

Both items are located in Georges Hall, Sydney. Postage will be paid for by buyer. Contact me via PM

Both items came out of my R33 GTR

Item: Link G4 Plug in.
Price: $100
Condition: It doesn't work but it can be fixed. I did send it back to Link in NZ to be looked over. This is what they said;

Hello,

We recently received two faulty Link ECU's in for servicing from you guys. The ECU with the trigger fault (serial# 11277) had a bad solder joint causing the issue. This has been repaired and the ECU is under warranty so there is no cost to you. The other ECU (serial# 11869) with the burnt PCB has been deemed non-repairable and will need to be replaced. A number of vias have been destroyed due to the extent of the burning meaning a number of wire links would need to be run from the top to the bottom if it was to be repaired. This would also effect the long term reliability of the unit. A number of other components have also been damaged which have resulted in all of the ignition outputs failing. Due to the wide extent of the damage it is hard to tell what the cause was, generally with the amount of current that has gone through and the damage to the 14V circuit it would point to the power supply polarity having been reversed. Since there is also such considerable damage to the ignition circuit (particularly ignition #2) it would be worth double checking your ignition setup to ensure this is not what has caused the surge. I have had a chat with the head of my team about replacing the PCB at a discounted rate and we can offer 50% off a new board. This will cost $700 (we can reload the existing base map on it all ready to go) plus $24 for return postage of this ECU (we will absorb half the return postage cost to cover the warranty ECU). Please let me know if you would like to go ahead with the new topboard (invoice attached to this email for this option) and I will get it ready to go back to you.

Item: Link 7 bar external MAP sensor

Price: $150

Condition: Perfect. Used for approximately 5000 kms. Only removed as the new ECU had a big enough onboard sensor.