Jump to content
SAU Community

Recommended Posts

Have a r34 gtt that's has had a minor front ender

Rest of the car is good

gearbox is epic

engine parts:

coilpacks $20 each

turbo $300

head $350

bottom end $350

wiring loom $100

or make a offer on the wholelot

other parts

Gearbox 1250

Doors 200

window mechanism $80

door cards 70

3 gtt rims with rubber $200

rear bumper $100

boot$100

brakes 350

diff $150

hubs 80 each

fuel tank $100

sold things

Seats 50
Dash 80

Anything you want just ask

Located valley heights Sydney

Pete 0448468884



post-219-0-25259700-1457351247_thumb.jpgpost-219-0-77923100-1457351269_thumb.jpgpost-219-0-08640900-1457351293_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/463485-r34-gtt-part-out/
Share on other sites

Do you have the gear shift surround?

na sorry everyone wants one of those you have to be quick

Likewise, second dibs, posted to Melbourne? ;)

as above

price on ash tray and hand brake lever with the cable from the cabin through to the underside of the chassis

ash tray 50 bux comes with a centre console

handbreak 100 as i have to pull it out

Pm sent

back at ya

Has the front reo bar been cut?

i dont know what a stock on looks like but it does appear to be cut i will get some better pics and post them up

Do you have airconditioner and mount points for the cdplayer and the DIN surround?

Damien

will check to see if they are there

You wouldn't have the blinker plugs/wiring for the front would you?

yea i do send me a message and we can work something out

pete

Price on dash cluster, passanger window motor, steering wheel (no airbag needed) sent to Melbourne?

Edit: Oh and perhaps the plastic engine cover too please?

Edited by HaydenThaGr8

Price on dash cluster, passanger window motor, steering wheel (no airbag needed) sent to Melbourne?

Edit: Oh and perhaps the plastic engine cover too please?[/quot

Only have the engine cover and steering wheel left of that lot

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...