Jump to content
SAU Community

Recommended Posts

Hey guys

I'm just about to put some new turbos on the gtr and I'm deciding which tuning shop near Tokyo to get my tune done at? I'll have all the mods done already and I've got a power FC in it so it would be tune only.

So far at the top of my list is Top Secret, then Mine's, and there are a few other shops near me like Bee-R etc. I could go to.

My question is if you had the chance to get your rb26 powered gtr tuned in Japan which shop would you pick? And why?

Link to comment
https://www.sau.com.au/forums/topic/463513-where-to-tune-my-gtr-in-tokyo/
Share on other sites

Haha I swear I'm not trying to show off, I just want to pick the best possible tuner here in Japan while I have the opportunity.

It seems mine's is more focussed on total car balance, and top secret will go as crazy as you want to go with your car.

having the distinct privilege of owning a "workshop" car, i'd highly recommend checking out Midori Seibi Centre.

They were one of a handful of workshops Nissan approved to "officially" be an R34 GTR workshop, and they also have a 4 hub Dynapak dyno, nice and accurate tool for tuning.

They don't quite have the international presence of Mines, Top Secret etc, but i can vouch for the quality of their work and their continuing development of GTR after-market parts is also a good indicator of where their passion and expertise lies.

I'm not super familiar with the geography, they might not be "Tokyo", but i believe they aren't far out.

My 2 cents.

  • Like 1

having the distinct privilege of owning a "workshop" car, i'd highly recommend checking out Midori Seibi Centre.

They were one of a handful of workshops Nissan approved to "officially" be an R34 GTR workshop, and they also have a 4 hub Dynapak dyno, nice and accurate tool for tuning.

They don't quite have the international presence of Mines, Top Secret etc, but i can vouch for the quality of their work and their continuing development of GTR after-market parts is also a good indicator of where their passion and expertise lies.

I'm not super familiar with the geography, they might not be "Tokyo", but i believe they aren't far out.

My 2 cents.

They are in Yokohama just down the road:

http://translate.google.co.uk/translate?hl=en&sl=ja&tl=en&u=http%3A%2F%2Fwww.midoriseibi.co.jp%2F

Hi Mish,

the one and only previous owner had all the work carried out at Midori; car is an R34 GTR V-Spec II Nur.

You name it, Midori pretty much did it. Full engine overhaul (kept at 2.6), HKS2530's, Midori development suspension (aragosta shocks and eibach prings), Midori brake kit (alcon), rose jointed suspension components, titanium exhaust, etc etc etc, plenty of little things too.

I don't have dyno sheets from the time it was at Midori, but power would have likely been around 350-360awkw's from this setup i would imagine.

Trent @ Chequered Tuning has looked after the tuning ever since, from possibly the first flex-fuel conversion on a GTR to likely the first HKS V-Cam installation being controlled entirely from the existing Link ecu; between Midori and Trent (and big nod to Racepace), the car has been sweet and has been full time E85 for quite a while now (probably about 5 years?)

She's a sweet little engine, which is testament to both Midori's 2.6 build when they did it, and care it's received in Australia since.

Midori has a quite regularly updated blog which is really cool to flick through, lots of interesting stuff (especially if your Japanese is good).

  • 4 weeks later...

Hi Mish,

the one and only previous owner had all the work carried out at Midori; car is an R34 GTR V-Spec II Nur.

You name it, Midori pretty much did it. Full engine overhaul (kept at 2.6), HKS2530's, Midori development suspension (aragosta shocks and eibach prings), Midori brake kit (alcon), rose jointed suspension components, titanium exhaust, etc etc etc, plenty of little things too.

I don't have dyno sheets from the time it was at Midori, but power would have likely been around 350-360awkw's from this setup i would imagine.

Trent @ Chequered Tuning has looked after the tuning ever since, from possibly the first flex-fuel conversion on a GTR to likely the first HKS V-Cam installation being controlled entirely from the existing Link ecu; between Midori and Trent (and big nod to Racepace), the car has been sweet and has been full time E85 for quite a while now (probably about 5 years?)

She's a sweet little engine, which is testament to both Midori's 2.6 build when they did it, and care it's received in Australia since.

Midori has a quite regularly updated blog which is really cool to flick through, lots of interesting stuff (especially if your Japanese is good).

nice, it sounds like midori did a great build. I'll check them out and see what they say. i've been told that a lot of shops won't tune a car they didn't build themselves, so i might have trouble getting the big name shops to tune it unfortunately.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before you blow your car up, have you checked you've made all the correct modifications to the wiring if you're still using the RB20DE loom?   Some things to look at: The pin used for the map sensor on the RB25DET, is the same pin used on the RB20DE for the Ring Gear Crankshaft Position Sensor, no idea what you've got it plugged into now. The turbo pressure control valve solenoid you're talking about on the RB25DET, the same pin is used for the Variable Air Intake Control Valve on the RB20DE.   The factory manual has the wiring pinouts in it for you to check everything. It also has the diagnostics process to read codes out. In addition, there's a great table that shows what sensors and what actuators not functioning will relate to which signals. And Nissan confirm the as everyone else has from experience, the Solenoid being disconnected won't cause a fuel cut. However, the turbo pressure sensor being missing / wrong, WILL cause a fuel cut. https://www.nicoclub.com/service-manual?fsm=Skyline%2FR34-Workshop-Manual-English.pdf
    • I've been hunting info on the G Series II - this is best I have found so far(Link below). Still waiting on the G35-1150 comp map, kind of very keen   So how do we go about getting precision on that little table of yours ?   https://turbosbytm.com/sites/default/files/product/technical-info/Garrett-G-Series-II-Product_Flyer 25 30 35_1.pdf  
    • yeah I get ~0.6L per session into the catch can. very ethanoly. It ends up overflowing out the breather of the catch can on circuit days too even with a 2.3L capacity catch can and I only drain out ~0.6L max. So every session I have to come in and drain the catch can, which is a hassle. So this is me cracking the shits and doing everything I can without removing the motor (back of head sump drain/breather and oil restrictors off the table). plans short term are: full length splash plates remove oem cam cover baffle add foam and reinstall at -10 or -12 AN fittings to the side of the cam covers down to the sump (luckily I already have fittings in the sump) Yes the ~340,000km unopened motor is probably not helping things
    • I'd use any fuel safe foam....mine went in 15 years and 15 rebuilds ago, still getting reused I'd have to say I don't understand swapping to studs to fit a particular baffle unless you are having a massive blowby issue, and even if you are addressing crankcase not head breathing is probably the next step.
    • BTW, the reason I came in here to "update" this list was that the Garrett G Series II range have been released and I've updated the list with their flow details if you're curious to check how they fit with previous Garretts and other brands The G-Series II G35 990 looks like a banger...
×
×
  • Create New...